KS0322 Keyestudio UNO Prototype Circuit Breakout Board PCB 10PCS
Revision as of 16:50, 4 July 2018 by Keyestudio (talk | contribs) (Created page with " == Keyestudio UNO Prototype Circuit Breakout Board PCB（10PCS） == <br>500px|frameless|thumb<br> == Introduction == This is a PCB board kit, includi...")
Keyestudio UNO Prototype Circuit Breakout Board PCB（10PCS）
Introduction
This is a PCB board kit, including 10 PCS of keyestudio UNO prototype circuit breakout board. If soldered well the pin header with 2.54mm pin pitch onto these PCB boards, you can seamlessly plug it into UNO R3 controller. During the use, you can not only directly solder the components on the top surface to complete various prototype circuits, but also can paste Mini breadboard to complete various circuit experiments using jumper wires.