KS0371 EASY plug Thin-film Pressure Sensor (Black and Eco-friendly): Difference between revisions
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) No edit summary |
||
Line 34: | Line 34: | ||
<br> | <br> | ||
==Upload the Code== | |||
Below is an example code. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly Mixly Blocks] and upload. <br> | |||
<br>[[File:ks0397 7.1.png|500px|frameless|thumb]]<br> | |||
<br> | |||
==What You Should See== | |||
<br>[[File:ks0397 7-1.png|500px|frameless|thumb]]<br> | |||
<br> | |||
After uploading the code, open the serial monitor, and set the baud rate to 9600. When tightly press the sensor, you should see the value become larger. So the sensor works normally. | |||
<br>[[File:ks0397 7-2.png|500px|frameless|thumb]]<br> | |||
== | <br> | ||
==Extension Experiment == | |||
< | <br> | ||
<span style=color:brown><big>'''Pressure Controlling LED'''</big></span><br> | |||
'''Hookup Guide'''<br> | |||
Connect the EASY Plug pressure sensor and LED module to control board using RJ11 cables. | |||
<br>[[File:压力.jpg|500px|frameless|thumb]]<br> | |||
<br> | |||
< | |||
'''Upload the Code'''<br> | |||
Below is an example code. | |||
<br>[[File:ks0397 7.2.png|500px|frameless|thumb]]<br> | |||
<br> | |||
After uploading the code, | '''What You Should See'''<br> | ||
<br>[[File: | After uploading the code, when tightly press the sensor with your finger, you should see the brightness of LED will change with the pressure intensity. | ||
<br>[[File:ks0397 7-3.png|500px|frameless|thumb]]<br> | |||
<br>[[File:ks0397 7-4.png|500px|frameless|thumb]]<br> | |||
<br> | <br> | ||
==Resources == | ==Resources == | ||
'''Download the PDF:'''<br> | '''Download the Arduino and PDF:'''<br> | ||
https://drive.google.com/open?id= | https://drive.google.com/open?id=1CtJBfwYeGofOLB8YHfs0fGD1TpGjjl9N | ||
'''Download the Mixly Code and Datasheet:'''<br> | |||
https://drive.google.com/open?id=1j5ZhSEeqS8EpaN3W47hUX2c4EyOn5euj | |||
<br> | <br> | ||
==Buy from == | ==Buy from == | ||
* | *[https://www.keyestudio.com/keyestudio-easy-plug-thin-film-pressure-sensor-for-arduino-stem-p0503-p0503.html '''Official Website''' ] | ||
*[https://www.aliexpress.com/store/product/Keyestudio-EASY-plug-Thin-film-Pressure-Sensor-for-Arduino-STEM/1452162_32957782655.html?spm=2114.12010612.8148356.11.65312f0cH6aBIN Shop on aliexpress ] | *[https://www.aliexpress.com/store/product/Keyestudio-EASY-plug-Thin-film-Pressure-Sensor-for-Arduino-STEM/1452162_32957782655.html?spm=2114.12010612.8148356.11.65312f0cH6aBIN Shop on aliexpress ] |
Revision as of 16:21, 8 May 2019
Introduction
This EASY plug pressure sensor adopts the flexible Nano pressure-sensitive material with an ultra-thin film pad. It has the functions of water-proof and pressure detection.
The force sensors are ultra-thin and flexible printed circuits, which can be easily integrated into force measurement applications.
The harder you press, the lower the sensor's resistance.
When the sensor detects the outside pressure, the resistance of sensor will make a change. So we can use the circuit to convert the pressure signal that senses pressure change into the corresponding electric signal output.
In this way, we can know the conditions of pressure changes by detecting the signal changes.
You can connect the sensor to EASY plug Control board for communication using only a RJ11 cable.
Parameters
- Working Voltage: DC 3.3V—5V
- Range: 0-0.5KG
- Thickness: <0.25mm
- Response Point: <20g
- Repeatability: <±5.8%(50% load)
- Accuracy: ±2.5%(85% range interval)
- Durability: >100 thousand times
- Initial Resistance: >100MΩ (no load)
- Response Time: <1ms
- Recovery Time: <15ms
- Working Temperature: -20℃ to 60℃
Technical Details
- Dimensions: 80mm*20mm*18mm
- Weight: 4.4g
Connect It Up
Connect the EASY Plug Pressure sensor to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
Upload the Code
Below is an example code. Open or drag below code to Mixly Blocks and upload.
What You Should See
After uploading the code, open the serial monitor, and set the baud rate to 9600. When tightly press the sensor, you should see the value become larger. So the sensor works normally.
Extension Experiment
Pressure Controlling LED
Hookup Guide
Connect the EASY Plug pressure sensor and LED module to control board using RJ11 cables.
Upload the Code
Below is an example code.
What You Should See
After uploading the code, when tightly press the sensor with your finger, you should see the brightness of LED will change with the pressure intensity.
Resources
Download the Arduino and PDF:
https://drive.google.com/open?id=1CtJBfwYeGofOLB8YHfs0fGD1TpGjjl9N
Download the Mixly Code and Datasheet:
https://drive.google.com/open?id=1j5ZhSEeqS8EpaN3W47hUX2c4EyOn5euj