KS0412 keyestudio L298P Shield: Difference between revisions
Jump to navigation
Jump to search
Keyestudio (talk | contribs) (Created page with "==Introduction== It is a two-way DC motor drive shield with L298P as the core. <br> The green terminal blocks on the shield are connected to VIN GND of UNO R3; simply power th...") |
(No difference)
|
Revision as of 13:31, 15 March 2019
Introduction
It is a two-way DC motor drive shield with L298P as the core.
The green terminal blocks on the shield are connected to VIN GND of UNO R3; simply power the board via terminal blocks or DC jack on the UNO R3. The max voltage supply should be DC18V.
The shield comes with soldering pad.You can solder your own electronic components and design various prototype circuits.
It also comes with a DIP switch for power control, simple to use.