KS0449 keyestudio 3-Channel IRF540NS Large Current MOS Module: Difference between revisions
Keyestudio (talk | contribs) No edit summary |
Keyestudio (talk | contribs) |
||
(3 intermediate revisions by the same user not shown) | |||
Line 11: | Line 11: | ||
When at HIGH, NA- NB- NC-pin headers are connected to ground, D1 D2 D3 led will turn on; when at LOW, NA- NB- NC-pin headers suspend, D1 D2 D3 led will turn off.<br> | When at HIGH, NA- NB- NC-pin headers are connected to ground, D1 D2 D3 led will turn on; when at LOW, NA- NB- NC-pin headers suspend, D1 D2 D3 led will turn off.<br> | ||
The module comes with four 3mm fixing holes, easy to fix on any other devices. | The module comes with four 3mm fixing holes, easy to fix on any other devices. | ||
<span style="color: red">Special note: this module only supports 5V microcontroller rather than 3.3V microcontroller.</span> | |||
Line 73: | Line 75: | ||
==Resource== | ==Resource== | ||
*'''Download all the relevant info from the link:'''<br> | *'''Download all the relevant info from the link:'''<br> | ||
https://fs.keyestudio.com/KS0449 | |||
<br> | <br> |
Latest revision as of 09:57, 4 March 2021
Overview
The keyestudio 3-channel IRF540NS high-current MOS module uses 3-channel MOS switch, which is applied to operate the high-current with small current, similar to a relay element.
It can be applied to drive the Servo, high-current LED light, etc.
When using, input the voltage less than 40V to the terminal block VIN GND, the voltage of V+ block is equal to VIN block.
We can control the HIGH or LOW of NA NB NC pin headers to determine whether connect to ground.
When at HIGH, NA- NB- NC-pin headers are connected to ground, D1 D2 D3 led will turn on; when at LOW, NA- NB- NC-pin headers suspend, D1 D2 D3 led will turn off.
The module comes with four 3mm fixing holes, easy to fix on any other devices.
Special note: this module only supports 5V microcontroller rather than 3.3V microcontroller.
Technical Details
- Working voltage: VIN terminal is less than DC 40V
- Operating current: less than 10A
- Operating temperature: -20 ~ +60℃
- Dimensions: 66mm * 38mm * 12 mm
- Weight: 22.8 g
- Environmental properties: ROHS
PINOUTS
Connection
Test Code
int BASE = 4 ; int NUM = 3; void setup() { for (int i = BASE; i < BASE + NUM; i ++) { pinMode(i, OUTPUT); } } void loop() { for (int i = BASE; i < BASE + NUM; i ++) { digitalWrite(i, HIGH); delay(2000); } for (int i = BASE; i < BASE + NUM; i ++) { digitalWrite(i, LOW); delay(2000); } }
Test Result
Done uploading the code, powered on, when NA- NB- NC-pin headers are successively connected to ground, D3 D2 D1 led will successively turn on; then NA- NB- NC-pin headers successively suspend, D3 D2 D1 led will successively turn off, alternately and circularly.
Resource
- Download all the relevant info from the link:
https://fs.keyestudio.com/KS0449
Buy from