KS0450 Keyestudio Vibration Motor Module (Black and Eco-friendly)
Overview
The keyestudio vibration motor module facilitates the conversion of electrical signals to mechanical vibration.
It mainly uses a high quality, high standard vibration motor.
We can directly control the motor vibration using the digital pin of Arduino microcontroller - HIGH level for triggering; LOW for breaking.
Or control the vibration intensity of the motor by Arduino PWM pins.
This module is suitable for the vibration-sensitive interactive creations, wearable smart device and so on.
The module comes with a 3mm fixing hole, easy to fix it to other devices.
Technical Details
- Operating voltage: DC 5V
- Operating current: 35mA
- Max power: 0.5W
- Operating temperature range: -25℃ to 65℃
- Interface: 3pin of 2.54mm pitch
- Fixed hole diameter: 3mm
- Dimensions: 34mm*19mm*6mm
- Weight: 3.2g
- Environmental properties: ROHS
Hookup Guide
Test Code
#define ZD 3
void setup() {
// put your setup code here, to run once:
pinMode(ZD,OUTPUT);
}
void loop() {
// put your main code here, to run repeatedly:
analogWrite(ZD,200);
delay(5000);
analogWrite(ZD,0);
delay(1000);
analogWrite(ZD,100);
delay(5000);
analogWrite(ZD,0);
delay(1000);
}
Result
Done uploading the code, the vibration motor on the keyestudio module will first strongly vibrate for 5 seconds, stop for 1 second, and weakly vibrate for 5 seconds, then stop for 1 second, alternately and circularly.
Resource
- Download test code :
https://fs.keyestudio.com/KS0450
Buy from
- [ Official Website]