KS0455 keyestudio HM-10 Bluetooth-4.0 V3 Compatible with HC-06 Pins

From Keyestudio Wiki
Jump to navigation Jump to search



keyestudio HM-10 Bluetooth-4.0 V3



Description

Bluetooth technology is a wireless standard technology that enables short-distance data exchange between fixed devices, mobile devices, and building personal area networks (using UHF radio waves in the ISM band of 2.4 to 2.485 GHz).
The Keyestudio HM-10 Bluetooth-4.0 V3 module is a master-slave machine. When use as the Host, it can send commands to the slave actively; when use as the Slave, it can only receive commands from the host.
The HM-10 Bluetooth module supports the Bluetooth 4.0 protocol, which not only supports Android mobile, but also supports iOS system.


Technical Details

  • 1)Bluetooth protocol: Bluetooth Specification V4.0 BLE
  • 2)No byte limit in serial port Transceiving
  • 3)In open environment, realize 100m ultra-distance communication with iphone4s
  • 4)USB protocol: USB V2.0
  • 5)Working frequency: 2.4GHz ISM band
  • 6)Modulation method: GFSK(Gaussian Frequency Shift Keying)
  • 7)Transmission power: -23dbm, -6dbm, 0dbm, 6dbm, can be modified by AT command.
  • 8)Sensitivity: ≤-84dBm at 0.1% BER
  • 9)Transmission rate: Asynchronous: 6K bytes ; Synchronous: 6k Bytes
  • 10)Security feature: Authentication and encryption
  • 11)Supporting service: Central & Peripheral UUID FFE0, FFE1
  • 12)Power consumption: Auto sleep mode, stand by current 400uA~800uA, 8.5mA during transmission.
  • 13)Power supply: 5V DC
  • 14)Working temperature: –5 to +65 Centigrade


thumb


Pins Description


thumb


Wiring Diagram


thumb


Test Code

When uploading the code, CANNOT connect the Bluetooth module; otherwise uploading fails!
You are supposed to upload the code to control board, then connect the Bluetooth module.


thumb


Result

First should install the APP on the cellphone.

Android APP

We only provide Android APP.
APP installed well, you can see the icon thumb on your Android phone.
After wiring, upload the test code to UNO R3 board and then connect the Bluetooth module. Powered on, Bluetooth module’s built in LED flashes.
Open the Android APPthumb, click to scan device. As shown below.
thumb

Click Scan Device to search the Bluetooth.
thumb

Click the first device thumb to connect the Bluetooth.
Connected, built-in LED on the Bluetooth module is normally on. APP interface will show the state connected.
thumb

On the bar enter letter a, and click to send, APP will print out the character “keyestudio” and D13 indicator on the UNO R3 board will flash once.
Continue to send the letter a, APP prints out multiple “keyestudio” character and D13 indicator flashes.
thumb


mac/iOS APP

You need to download the mac/iOS compatible APP in APP store.
First we enter the APP store, search hm10, and select the hm10 bluetooth serial lite.
thumb


Click to install the APP, as shown below.
thumb


APP installed well, a Bluetooth iconthumb will pop up on your phone. Click to enter the APP.

Upload the test code to control board successfully, then plug in the Bluetooth module.
Open the Bluetooth APP, click thumb to start searching and pairing the Bluetooth module. Click thumbto start connecting HM-10 Bluetooth module.
Connected, the built-in LED on the Bluetooth module will be from quick flash to normally on.

thumb

On the input bar enter a letter a, and click to send, APP will print out the character “keyestudio” and D13 indicator on the UNO R3 board will flash once.
Continue to send the letter a, APP prints out multiple “keyestudio” characters and D13 indicator flashes.
thumb



Resource

  • Click the link to download the software and datasheet:

https://drive.google.com/open?id=1f9dvboX9KyEnEsyNQyjvs37K5wcI2yVY



Get One Now