KS0470 Keyestudio 4WD BT Robot Car V2.0 Kit for Mixly

Note：Dear customers, this KS0470 kit was updated on 10th September,2020. The control board was replaced with keyestudio V4.0 board and we also added a red LED module and 3 pcs 3pin female-female jumper wires. The kit can be still used normally even without these two items

Thanks for your support on our products, we will continue to provide you better quality and service!

• About keyestudio
  

Keyestudio is a best-selling brand owned by KEYES Corporation, our product lines range from controller boards, shields and sensor modules to smart car and complete starter kits for Arduino, Raspberry Pi and BBC micro:bit, which designed for customers of any level to learn electronics and programming knowledge. All of our products comply with international quality standards and are greatly appreciated in a variety of different markets throughout the world.

You can obtain the details and the latest information through visiting the following web sites:http://www.keyestudio.com

• References and After-sales Service
  

1.Download Profile：https://fs.keyestudio.com/KS0470

2.Feel free to contact us please, if there is missing part or you encounter some troubles. Welcome to send email to us：service@keyestudio.com. We will update projects and products continuously based on your sincere advice.

• Warning

1.This product contains tiny parts(screws, copper pillars), keep it out of reach of children under 7 years old please.
2.This product contains conductive parts (control board and electronic module). Please operate according to the requirements of this tutorial. Improper operation may cause overheating and damage parts. Do not touch and immediately disconnect the circuit power.

• Copyright

The keyestudio trademark and logo are the copyright of KEYES DIY ROBOT co.,LTD. All products under keyestudio brand can’t be copied, sold and resold without authorization by anyone or company. If you’re interested in our items, please contact to our sales representatives: fennie@keyestudio.com

Introduction

Nowadays, technological education such as VR, kids programming, and artificial intelligence, has become mainstream in educational industry. Thereby, people attach importance to STEAM education. Arduino is pretty notable in Maker education.

So what is Arduino? Arduino is an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs - light on a sensor, a finger on a button, or a Twitter message - and turn it into an output - activating a motor, turning on an LED, publishing something online. Based on this, Keyestudio team has designed a 4wd robot. It has a processor which is programmable using the Arduino IDE, to mapped its pins to sensors and actuators by a shield that plug in the processor, it reads sensors and controls the actuators and decides how to operate.

15 learning projects, from simple to complex, will guide you how to make a smart 4wd robot on you own and introduce the detailed knowledge about sensors and modules.

Simultaneously, it is the best choice if you intend to obtain a DIY robot for learning programming, entertainment and competition requirement.

Features

• 1.Multi-purpose function: Obstacle avoidance, follow, IR remote control, Bluetooth control, ultrasonic follow and displayed face emoticons.
• 2. Simple assembly: No soldering circuit required, complete assembly easily.
• 3. High Tenacity: Aluminum alloy bracket, metal motors, high quality wheels and tracks
• 4. High extension: expand other sensors and modules through motor driver shield and sensor shield
• 5. Multiple controls: IR remote control, App control(IOS and Android system)
• 6.Basic programming：C language code of Arduino IDE.

Specification

• Working voltage: 5v
• Input voltage: 7-12V
• Maximum output current: 2A
• Maximum power dissipation: 25W (T=75℃)
• Motor speed: 5V 200 rpm/min
• Motor drive mode: dual H bridge drive
• Ultrasonic induction angle: <15 degrees
• Ultrasonic detection distance: 2cm-400cm
• Infrared remote control distance: 10 meters (measured)
• Bluetooth remote control distance: 50 meters (measured)
• Bluetooth control: support Android and iOS system

Product List

Assembly Guide

Note: Peel the plastic film off the board first when installing the smart car. To be honest, we never intend to send wood to you.

Step 1:Mount the Bottom PCB Prepare the parts as follows:

• Gear motor *4
• Fixed part *4
• M3 nickel plated nut *10
• M3*6mm round-head screw *14
• 4WD bottom PCB *1
• Tracking sensor *1
• Wheel *4
• Dual 5p wire *1
• M3*40mm copper pillar*6
• M3*30m round-head screw *8
• M3*8mm round-head screw *2

Step 2: Install Dot Matrix

Prepare the parts as follows:

• 8*16 LED panel *1
• 4Wd baffle
• 4P wire *1
• M2x8mm round-head screw *4
• M2 nut *4

Step 3: Servo plastic platform

Prepare the parts as follows: Servo *1 M2*4 screw *1 Black cable tie*2 Ultrasonic sensor*1 Black servo platform *1 M1.2*4 tapping screw *4 M2*8 tapping screw *2

Step 4: Install the Top PCB

Prepare the parts as follows:

• Top PCB *1
• M3 nut *3
• Motor drive board *1
• Control board *1
• IR receiver module *1
• M3*10mm copper pillar *8
• M3*8mm round-head screw *1
• M3*6mm round-head screw *16
• M3*10mm flat screw *2
• 6-Cell AA battery holder *1

Step 5: Install Top PCB

Prepare the parts as follows:

• Bluetooth module *1
• M3*6MM round-head screw *6
• Jumper cap *8

Step 6: Hook-up Guide