KS0480 Keyestudio Micro bit Honeycomb Traffic Light Module

From Keyestudio Wiki
Revision as of 09:40, 14 November 2019 by Keyestudio (talk | contribs) (Created page with "<br> thumb|400px|right| Keyestudio Micro bit Honeycomb Traffic Light Module<br> <br> == Description == The keyestudio micro bit Honeycomb traffic light mod...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


Keyestudio Micro bit Honeycomb Traffic Light Module



Description

The keyestudio micro bit Honeycomb traffic light module is fully compatible with the micro bit control board. In the experiment, we connect this module to the micro:bit control board using crocodile clip wire. There are 6 ports on the module, 3 GND ports are connected. The module comes with red, yellow and green 3 LED lights, we can control the 3 LEDs on and off on the module , and simulate the roadside traffic lights flashing.



Technical parameters

  • Working voltage: DC 3.0-3.3V
  • Control port: digital port
  • Size: 42mm*47mm*12mm
  • Weight: 5.7g
  • Environmental attributes: ROHS



Wiring Diagram


thumb



Test code


thumb



Test Result

According to wiring diagram, upload test code successfully. After power-on, the 3 LEDs on the module automatically simulate the traffic light operation.


Resources

Download Test Code:
https://1drv.ms/u/s!ArhgRvK6-RyJg294OTh5xHsKWFxM?e=ereVjs




Get One Now

  • [ Official Website]
  • [ Shop on aliexpress ]