KS0485 Keyestudio NANO Shield With DC End (Black and Eco-friendly): Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
Line 33: Line 33:


==Get One Now==
==Get One Now==
*[https://www.aliexpress.com/store/product/Keyestudio-Passive-Buzzer-Sound-Module-For-BBC-micro-bit/1452162_32999037060.html?spm=2114.12010611.8148356.17.3f896c0eHzY5BG 
*[https://keyestudio.aliexpress.com/store/1452162 Shop on aliexpress ]
https://keyestudio.aliexpress.com/store/1452162   Shop on aliexpress ]


*[https://www.keyestudio.com/keyestudio-passive-buzzer-sound-module-for-bbc-microbit-p0539-p0539.html  Official website]
*[https://www.keyestudio.com/keyestudio-passive-buzzer-sound-module-for-bbc-microbit-p0539-p0539.html  Official website]

Revision as of 17:12, 18 March 2020


05851.png


Description

We particularly design this shield to make up the problem of connecting the sensor shield to keyestudio NANO control board difficultly.

This keyestudio NANO shield has extended the digital and analog ports out as 3PIN interface (G-GND V-5V S-digital port/analog port) It also breaks out some communication pins/female headers of 2.54mm pitch, like I2C and serial communication.

Additionally, you can supply the voltage needed to the sensor modules through blue terminal blocks on the shield. Because some sensor modules is not used with 5V or 3.3V but with special voltage.


To supply power efficiently, the shield comes with a black DC head. The keyestudio NANO shield is supplied power by Power_Switch self-locking switch after the DC head is input DC 7-12V.

With external power input, the keyestudio NANO shield provide power to NANO control board on the one hand; it stably outputs 5V (output current 1.5A) to power the external sensor / module by voltage regulator chip L7805 on the other hand. At last, 5V can transfer into 3.3V via AMS1117-3.3V chip, and led out by pins.

The shield comes with a reset button and 1 signal indicators as well. Two rows of 2.54mm pad holes reserved on the side can lead out all external interfaces of the NANO control board. The 4 MS fixing holes make the shield fixed on the other devices easier.

Parameters

External input voltage: DC 7-12V Output current: 1.5A Maximum power: 7W Working temperature: -20 ℃ --60 ℃ Size: 57.3 * 53.5mm Pin Header / Female Header Pitch: 2.54mm Direct fixing hole: 3mm Environmental attributes: ROHS


Get One Now