KS0511 Keyestudio Quick Connectors Ultrasonic Module (CS100A Chip/Black/Environment-friendly)

From Keyestudio Wiki
Revision as of 13:25, 8 July 2021 by Keyestudio (talk | contribs)
Jump to navigation Jump to search


KS0511-01.png


Description

This ultrasonic module, equipped with the CS100A chip , is of high performance and low cost and boasts a wide voltage range from 3.3V to 5V. It can measure distance from 4cm to 300 cm with high accuracy and stability so as to be well applied in distance measurements, robots, anti-theft devices and others.


Working Principle

(1)Use trig Port to trigger 10us high level signals;
2003-4.png

(2)Automatically send eight square waves of 40khz out and detect if there are signals sent back.
2003-5.png

(3)If there are signals back, output a high level via echo. Then the time lasting for high level is the time gap between the transmission and reception of the signals.
2003-6.png

Measured distance(L) =(high level time* the speed of time(340M/S))/2.


2003-1.png

Parameters


Working voltage: 3.3-5V (DC)
Work current: 50MA-100MA,usually 65mA
Interface: 2.54mm 4PIN
Working frequency: 40KHz
Maximum distance: 300cm
Minimum distance: 4cm
Measurement angle: 15 degrees
Trigger input signal: 10μs TTL pulse
Output signals: digital signals
Size: 49 * 22 * 19mm
Weight: 9.2g

Connection Diagram