KS3022 Keyestudio Pico IO Prototype Expansion Board

From Keyestudio Wiki
Revision as of 15:57, 23 August 2022 by Keyestudio (talk | contribs) (→‎Dimension)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search



The Keyestudio Pico IO prototype expansion board works with the Raspberry pico board. It can expand IO ports of the pico board. There are two IIC ports, a serial communication interface , three analog ports and six digital ports. This sensor board simplifies the circuit and makes it easy to connect with commonly used sensors. You can stack a Raspberry Pi pico board onto this shield.



  • Length, width and height: 69mm, 54mm, 12mm
  • Weight: 22.7g