KS4030 Keyestudio Micro:bit IO Port Expansion Sensor Shield with Level Conversion: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
(Created blank page)
 
No edit summary
Line 1: Line 1:
<br>[[File:Ks4030-1.png|600px|right|frameless|thumb]]<br>


== Description ==
When we are doing DIY experiments, we often use the Micro:bit control boards and sensor u[. In order to facilitate the wiring-up, the Micro:bit expansion board are led out the pins for the connection of control board, motors and sensors. Due to anti-reverse interfaces and the fixed wire sequence, the sensor/module won’t burn out.
The expansion board has 2.54mm anti-reverse interfaces with silk screen. We supply power through the on-board PH2.54 lithium battery box and an micro USB cable. The power supply voltage is 3.3~5V.
In addition, it comes with four 3mm positioning holes, which is convenient to fix on other devices.
== Specification ==
Working voltage: 3.3V~5V
Current: 500mA
Maximum power: 2.5W
Weight: 25.1g
Operating temperature range: 0~50°C
Interface: 2.54mm anti-reverse interface
Size: 70.2*56*1.6mm
Hole diameter: 3mm
== Schematic Diagram ==
<br>[File:Ks4030-2.png|500px|frameless|thumb]]<br>
<br>[[File:Ks4030-3.png|500px|frameless|thumb]]<br>
<br>[[File:Ks4030-4.png|500px|frameless|thumb]]<br>
<br>[[File:Ks4030-5.png|500px|frameless|thumb]]<br>
== Pin out ==
<br>[[File:0288-2.png|500px|frameless|thumb]]<br>
== Test Results ==
<br>[[File:Ks4030-6.png|500px|frameless|thumb]]<br>
<br>[[File:Ks4030-7.png|500px|frameless|thumb]]<br>
<br>[[File:Ks4030-8.png|500px|frameless|thumb]]<br>

Revision as of 15:19, 5 January 2022


thumb


Description

When we are doing DIY experiments, we often use the Micro:bit control boards and sensor u[. In order to facilitate the wiring-up, the Micro:bit expansion board are led out the pins for the connection of control board, motors and sensors. Due to anti-reverse interfaces and the fixed wire sequence, the sensor/module won’t burn out. The expansion board has 2.54mm anti-reverse interfaces with silk screen. We supply power through the on-board PH2.54 lithium battery box and an micro USB cable. The power supply voltage is 3.3~5V. In addition, it comes with four 3mm positioning holes, which is convenient to fix on other devices.


Specification

Working voltage: 3.3V~5V Current: 500mA Maximum power: 2.5W Weight: 25.1g Operating temperature range: 0~50°C Interface: 2.54mm anti-reverse interface Size: 70.2*56*1.6mm Hole diameter: 3mm

Schematic Diagram


[File:Ks4030-2.png|500px|frameless|thumb]]

thumb

thumb

thumb

Pin out


thumb

Test Results


thumb

thumb

thumb