KS4030 Keyestudio Micro:bit IO Port Expansion Sensor Shield with Level Conversion

From Keyestudio Wiki
Revision as of 09:26, 9 May 2022 by Keyestudio (talk | contribs) (→‎Schematic Diagram)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search


thumb


Description

When we are doing DIY experiments, we often use the Micro:bit control boards and sensor u[. In order to facilitate the wiring-up, the Micro:bit expansion board are led out the pins for the connection of control board, motors and sensors. Due to anti-reverse interfaces and the fixed wire sequence, the sensor/module won’t burn out. The expansion board has 2.54mm anti-reverse interfaces with silk screen. We supply power through the on-board PH2.54 lithium battery box and an micro USB cable. The power supply voltage is 3.3~5V. In addition, it comes with four 3mm positioning holes, which is convenient to fix on other devices.


Specification

  • Working voltage: 3.3V~5V
  • Current: 500mA
  • Maximum power: 2.5W
  • Weight: 25.1g
  • Operating temperature range: 0~50°C
  • Interface: 2.54mm anti-reverse interface
  • Size: 70.2*56*1.6mm
  • Hole diameter: 3mm

Schematic Diagram


thumb

thumb

thumb

thumb

Pin out


thumb

Test Results


thumb

thumb

thumb