Keyestudio Wiki:Privacy policy
Revision as of 11:17, 11 February 2017 by Keyestudio (talk | contribs) (Created page with "==keyestudio RPI T-shape GPIO Shield== <br>500px|frameless|thumb<br> ==Introduction== This RPI T-shape GPIO Shield is specifically designed for Raspberr...")
keyestudio RPI T-shape GPIO Shield
Introduction
This RPI T-shape GPIO Shield is specifically designed for Raspberry Pi B+, to help you to connect external device on the breadboard. The T-Cobbler can plug into any solderless breadboard. The T-Cobbler PCB has all the pins labeled nicely so you can go forth and build circuits without keeping a pin-out printout at your desk.