Ks0008 keyestudio Joystick Module

From Keyestudio Wiki
Jump to navigation Jump to search


Introduction

Lots of robot projects need joystick. And it is an affordable joystick module for you. By simply connecting to two analog inputs, the robot is at your commands with X, Y control. It also has a switch that is connected to a digital pin. This joystick module can be easily connected to Arduino by IO Shield. This module is for Arduino(V5) with cables supplied. 
thumb

Specification

  • Supply Voltage: 3.3V to 5V
  • Interface: Analog x2, Digital x1
  • Size: 40*28mm
  • Weight: 12g

Connection Diagram


thumb

Sample Code

int JoyStick_X = 0; //x
int JoyStick_Y = 1; //y
int JoyStick_Z = 3; //key
  void setup() 
{
  pinMode(JoyStick_Z, INPUT); 
  Serial.begin(9600); // 9600 bps
}
void loop() 
{
  int x,y,z;
  x=analogRead(JoyStick_X);
  y=analogRead(JoyStick_Y);
  z=digitalRead(JoyStick_Z);
  Serial.print(x ,DEC);
  Serial.print(",");
  Serial.print(y ,DEC);
  Serial.print(",");
  Serial.println(z ,DEC);
  delay(100);
}


Resources

Video

http://www.keyestudio.com/wp/2016/05/ks0008-keyestudio-joystick-module-for-arduino/

Datasheet

http://www.keyestudio.com/files/index/download/id/1463642889/

Get One Now

http://www.keyestudio.com/keyestudio-joystick-module-for-arduino.html

https://www.amazon.com/Next-Keyestudio-Joystick-Module-Arduino/dp/B01CXOI6O2/ref=sr_1_3?ie=UTF8&qid=1479113057&sr=8-3&keywords=keyestudio+Joystick+Module+for+Arduino