Ks0010 keyestudio 3W LED Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
<br>
==Introduction==
==Introduction==
This LED module is of high brightness because the lamp beads it carries is 3w. We can apply this module to Arduino projects. For example, intelligent robots can use this module for illumination purpose.
This LED module is of high brightness because the lamp beads it carries is 3W. We can apply this module to Arduino projects. <br>
 
For example, intelligent robots can use this module for illumination purpose.<br>
Please note that the LED light can't be exposed directly to human eyes for safety concerns.
Please note that the LED light can't be exposed directly to human eyes for safety concerns.
<br>[[File:3W LED Module.png|500px|frameless|thumb]]<br>
<br>[[File:KS0010 (4).jpg|500px|frameless|thumb]]<br>


<br>
==Specification==
==Specification==
*Color temperature: 6000~7000K 
* Color temperature: 6000~7000K 
*Luminous flux: 180~210lm 
* Luminous flux: 180~210lm 
*Current: 700~750mA 
* Current: 700~750mA 
*Power: 3W 
* IO Type: Digital
*Light angle: 140 degree 
* Supply Voltage: 3.3V to 5V
*Working temperature: -50~80'C 
* Power: 3W 
*Storage temperature: -50~100'C 
* Light angle: 140 degree 
*High power LED module, controlled by IO port microcontroller 
* Working temperature: -50~80℃ 
*Great for Robot and search & rescue platform application 
* Storage temperature: -50~100℃ 
*IO Type: Digital
* High power LED module, controlled by IO port microcontroller 
*Supply Voltage: 3.3V to 5V
* Great for Robot and search & rescue platform application 
*Size: 40x28mm
*Weight: 6g


<br>
==Connection Diagram ==
==Connection Diagram ==
<br>[[File:Ks0010.png|700px|frameless|thumb]]<br>


<br>[[File:Connection Diagram1.png|500px|frameless|thumb]]<br>  
<br>


==Sample Code ==
==Sample Code ==
<pre>
<pre>
// the setup function runs once when you press reset or power the board
// the setup function runs once when you press reset or power the board
Line 40: Line 40:
   digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
   digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
   delay(1000);              // wait for a second
   delay(1000);              // wait for a second
}</pre>
}
</pre>
 
<br>
==Result==
Done wiring and powered up,upload well the code, both D13 led and the led on the module blink for one second then off, circularly.
<br>[[File:KS0349 3-2.png|800px|frameless|thumb]]<br>


<br>
==Resources ==
==Resources ==
'''Video'''<br>
http://video.keyestudio.com/ks0010/


'''Video'''
'''Datasheet and Code''' <br>
https://fs.keyestudio.com/KS0010


http://www.keyestudio.com/wp/2016/05/ks0011-keyestudio-5v-single-relay-module/
<br>


'''Datasheet'''
==Get One Now==
 
*[https://www.keyestudio.com/free-shipping-keyestudio-3w-l-ed-module-for-arduino-uno-r3-mega-2560-r3-p0423-p0423.html '''Official Website''']
http://www.keyestudio.com/files/index/download/id/1463643015/


==Get One Now==
*[https://www.aliexpress.com/store/product/Free-shipping-Keyes-3w-led-module/1452162_2055683676.html?spm=2114.12010615.8148356.1.414b4344BR1hFu  '''On Aliexpress''']


http://www.keyestudio.com/keyestudio-3w-led-module-for-arduino.html


https://www.amazon.com/Keyestudio-Module-module-Arduino-raspberry/dp/B016K6LB9Q/ref=sr_1_3?ie=UTF8&qid=1479114260&sr=8-3&keywords=keyestudio+3W+LED+Module+for+Arduino


[[Category: Sensor]]
[[Category: Module]]

Latest revision as of 09:06, 8 January 2021


Introduction

This LED module is of high brightness because the lamp beads it carries is 3W. We can apply this module to Arduino projects. 
For example, intelligent robots can use this module for illumination purpose.
Please note that the LED light can't be exposed directly to human eyes for safety concerns.
thumb


Specification

  • Color temperature: 6000~7000K 
  • Luminous flux: 180~210lm 
  • Current: 700~750mA 
  • IO Type: Digital
  • Supply Voltage: 3.3V to 5V
  • Power: 3W 
  • Light angle: 140 degree 
  • Working temperature: -50~80℃ 
  • Storage temperature: -50~100℃ 
  • High power LED module, controlled by IO port microcontroller 
  • Great for Robot and search & rescue platform application 


Connection Diagram


thumb


Sample Code

// the setup function runs once when you press reset or power the board
void setup() {
  // initialize digital pin 13 as an output.
  pinMode(13, OUTPUT);
}

// the loop function runs over and over again forever
void loop() {
  digitalWrite(13, HIGH);   // turn the LED on (HIGH is the voltage level)
  delay(1000);              // wait for a second
  digitalWrite(13, LOW);    // turn the LED off by making the voltage LOW
  delay(1000);              // wait for a second
}


Result

Done wiring and powered up,upload well the code, both D13 led and the led on the module blink for one second then off, circularly.
thumb


Resources

Video
http://video.keyestudio.com/ks0010/

Datasheet and Code
https://fs.keyestudio.com/KS0010


Get One Now