Ks0032 keyestudio RGB LED Module
Introduction
This is a full-color LED module, where contains 3 basic colors－red, green and blue. They can be regarded as separate three LED lights. After programming, you can turn them on and off by sequence. And you can also use PWM analog output to mix these three colors to generate different colors.
Specification
- Color: red, green and blue
- Brightness: High
- Voltage: 5V
- Input: digital level
- Size: 30 * 20mm
- Weight: 3g
Connection Diagram
Sample Code
int redpin = 11; //select the pin for the red LED
int bluepin =10; // select the pin for the blue LED
int greenpin =9;// select the pin for the green LED
int val;
void setup() {
pinMode(redpin, OUTPUT);
pinMode(bluepin, OUTPUT);
pinMode(greenpin, OUTPUT);
}
void loop()
{for(val=255; val>0; val--)
{analogWrite(11, val);
analogWrite(10, 255-val);
analogWrite(9, 128-val);
delay(1);
}
for(val=0; val<255; val++)
{analogWrite(11, val);
analogWrite(10, 255-val);
analogWrite(9, 128-val);
delay(1);
}
Resources
Video
http://www.keyestudio.com/wp/2016/05/ks0032-keyestudio-rgb-led-module-for-arduino/
Datasheet
http://www.keyestudio.com/files/index/download/id/1463650173/
Buy from
Official Website
http://www.keyestudio.com/keyestudio-rgb-led-module-for-arduino.html
Amazon Store