Ks0100 keyestudio EASY plug White LED Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
(Created page with "==Introduction== This is a special EASY plug white LED module. When connecting to ARDUINO, after programming, it can emit white light. For easy use, the module’s 3pin are b...")
 
 
(12 intermediate revisions by the same user not shown)
Line 1: Line 1:
==Introduction==
This is a special EASY plug white LED module. When connecting to ARDUINO, after programming, it can emit white light.
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0
You should connect the LED module to control board for communication using an RJ11 cable.
You can combine with other sensors to do various interactive experiments.


You can also choose other LED modules to emit different light color like blue, green, yellow and red.


==Features==
[[image:Ks0100-3.png|thumb|300px|right|Keyestudio EASY plug White LED Module]]
 
<br>
== Introduction ==
This is a special EASY plug white LED module. When connecting to ARDUINO, after programming, it can emit white light. <br>
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 <br>
You should connect the LED module to control board for communication using an RJ11 cable.<br>
You can combine with other sensors to do various interactive experiments. <br>
You can also choose other LED modules to emit different light color like blue, green, yellow and red.<br>
 
<span style=color:red> '''Special Note:''' <br>
The sensor/module is equipped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has different internal line sequence, can’t be used compatibly with our sensor/module. </span><br>
 
 
<br>
 
== Features ==
* Interface: Easy plug
* Interface: Easy plug
* Sensor type: Digital
* Sensor type: Digital
Line 15: Line 25:
* Useful for light projects
* Useful for light projects


==Technical Details==
<br>
== Technical Details ==
* Dimensions: 34mm*20mm*18mm
* Dimensions: 34mm*20mm*18mm
* Weight: 3.8g
* Weight: 3.8g


==Connect It Up==
<br>
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
== Connect It Up ==
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.<br>
<br>[[File:Ks0100-2-2.png|600px|frameless|thumb]]<br>
 
<br>
== Upload the Code ==
Below is an example code for LED blinking.
<br>[[File:ks0397 2.2.png|600px|frameless|thumb]]<br>
 
<br>
 
== What You Should See ==
<br>[[File:ks0397 2-1.png|600px|frameless|thumb]]<br>
 
The LED will flash on for one second, then off for one second. <br>
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.  <br>
<br>[[File:Ks0100-1-1.png|600px|frameless|thumb]]<br>
 
 
<br>
 
==Resources ==
https://fs.keyestudio.com/KS0100
<br>
 
==Buy from ==
 
*[https://www.keyestudio.com/keyestudio-rj11-easy-plug-led-module-white-for-arduino-stem-p0387-p0387.html '''Official Website''' ]
 
*[https://www.aliexpress.com/store/product/2016-NEW-Keyestudio-EASY-plug-Piranha-L-ED-Module-for-arduino/1452162_32639439302.html?spm=2114.12010612.8148356.1.3fed6d83r1MGWv  '''aliexpress store''']
 
 
[[category: EASY Plug]]

Latest revision as of 09:30, 28 April 2021


Keyestudio EASY plug White LED Module


Introduction

This is a special EASY plug white LED module. When connecting to ARDUINO, after programming, it can emit white light.
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0
You should connect the LED module to control board for communication using an RJ11 cable.
You can combine with other sensors to do various interactive experiments.
You can also choose other LED modules to emit different light color like blue, green, yellow and red.

Special Note:
The sensor/module is equipped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface.
If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has different internal line sequence, can’t be used compatibly with our sensor/module.



Features

  • Interface: Easy plug
  • Sensor type: Digital
  • Working voltage: 5V
  • LED color: white
  • Easy to use
  • Useful for light projects


Technical Details

  • Dimensions: 34mm*20mm*18mm
  • Weight: 3.8g


Connect It Up

Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.

thumb


Upload the Code

Below is an example code for LED blinking.
thumb


What You Should See


thumb

The LED will flash on for one second, then off for one second.
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.

thumb



Resources

https://fs.keyestudio.com/KS0100

Buy from