Ks0122 keyestudio EASY plug PIR Motion Sensor

From Keyestudio Wiki
Revision as of 11:05, 24 September 2016 by Keyestudio (talk | contribs) (Created page with "==EASY plug PIR Motion Sensor== <br>500px|frameless|thumb<br> ==Introduction== Pyroelectric infrared motion sensor can detect infrared signals from a mo...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

EASY plug PIR Motion Sensor


thumb

Introduction

Pyroelectric infrared motion sensor can detect infrared signals from a moving person or moving animal, and outputs switching signals. It has advantages of low power consumption, good concealing, low cost etc. It can be applied to a variety of occasions to detect the movement of human body.
Note: this module needs to be used together with EASY plug control board.


Specification

  • Interface: Easy plug
  • Input Voltage: 3.3 ~ 5V, 6V Maximum
  • Working Current: 15uA
  • Working Temperature: -20 ~ 85 ℃
  • Output Voltage: High 3V, low 0V
  • Output Delay Time (High Level): About 2.3 to 3 Seconds
  • Detection angle: 100 °
  • Detection distance: 7 meters
  • Output Indicator LED (When output HIGH, it will be ON)
  • Pin limit current: 100mA
  • Size: 36.4*20mm
  • Weight: 6g


Connection Diagram


thumb


Sample Code

byte sensorPin = 3;
byte indicator = 13;
void setup()
{
 pinMode(sensorPin,INPUT);
 pinMode(indicator,OUTPUT);
 Serial.begin(9600);
}
void loop()
{
 byte state = digitalRead(sensorPin);
 digitalWrite(indicator,state);
 if(state == 1)Serial.println("Somebody is in this area!");
 else if(state == 0)Serial.println("No one!");
 delay(500);
}