Ks0124 keyestudio EASY plug DS18B20 Temperature Sensor

From Keyestudio Wiki
Jump to navigation Jump to search

EASY plug DS18B20 Temperature Sensor


thumb

Introduction

This DS18B20 Temperature Sensor Module can be used to quantify environmental temperature testing. The temperature range is -55 ~ +125 ℃, inherent temperature resolution 0.5 ℃. It also support multi-point mesh networking.
Note: this module needs to be used together with EASY plug control board.


Specification

  • Interface: Easy plug
  • Supply Voltage: 3.3V to 5V
  • Temperature range: -55 °C ~ +125 °C
  • Interface: Digital
  • Size: 40*20mm
  • Weight: 5g


Connection Diagram


thumb


Sample Code

http://www.pjrc.com/teensy/arduino_libraries/OneWire.zip

#include <OneWire.h>
int DS18S20_Pin = 2; //DS18S20 Signal pin on digital pin 2
//Temperature chip i/o
OneWire ds(DS18S20_Pin);  // on digital pin 2
void setup(void) {
 Serial.begin(9600);
}
void loop(void) {
 float temperature = getTemp();
 Serial.println(temperature);
 
 delay(100); //to slow down the output so it is easier to read
 
}
float getTemp(){
 //returns the temperature from one DS18S20 in DEG Celsius
 byte data[12];
 byte addr[8];
 if ( !ds.search(addr)) {
     //no more sensors on chain, reset search
     ds.reset_search();
     return -1000;
 }
 if ( OneWire::crc8( addr, 7) != addr[7]) {
     Serial.println("CRC is not valid!");
     return -1000;
 }
 if ( addr[0] != 0x10 && addr[0] != 0x28) {
     Serial.print("Device is not recognized");
     return -1000;
 }
 ds.reset();
 ds.select(addr);
 ds.write(0x44,1); // start conversion, with parasite power on at the end
 byte present = ds.reset();
 ds.select(addr);    
 ds.write(0xBE); // Read Scratchpad
 
 for (int i = 0; i < 9; i++) { // we need 9 bytes
   data[i] = ds.read();
 }
 ds.reset_search();
 
 byte MSB = data[1];
 byte LSB = data[0];
 float tempRead = ((MSB << 8) | LSB); //using two's compliment
 float TemperatureSum = tempRead / 16;
 
 return TemperatureSum;
 
}

Resources

PDF

https://drive.google.com/open?id=1thhRA_Qcgri0Z0hs8L2zu6FqEyOiLvi3

Buy from

http://www.keyestudio.com/keyestudio-easy-plug-ds18b20-temperature-sensor-for-arduino.html