Ks0152 keyestudio A4988 3D printer stepper motor driver CNC shield V4: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
==keyestudio A4988 3D printer stepper motor driver CNC shield V4==
 
<br>[[File:ks0152.png|500px|frameless|thumb]]<br>
 
[[image:Ks0152-图片1.png|thumb|400px|right|Keyestudio CNC Shield V4]]
 


==Introduction==
==Introduction==
keyestudio 3D printer stepper motor driver CNC shield V4 needs to work with Nano board. It can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for A4988 stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each channel of stepper motor only needs 2 IO ports, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project.<br>
keyestudio CNC shield V4 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/index.php/Ks0173_keyestudio_Nano_ch340  NANO control board ]. So you just need to stack the Nano board onto the shield when using. <br>
It has total 3-way pin slots for stepper motor drive modules (Not Included) to drive 3-channel stepper motors. <br>
Each stepper motor only needs 2 IO ports, so 6 IO ports is enough to manage 3 stepper motors, very easy to use. This shield can make quick work for managing stepper motors in your project.  <br>
To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode by plugging or unplugging the jumper cap. <br>
For example, connect the A4988 to the shield, unplug three jumpers, it is in full-step mode; if plug all the jumpers, it is 16-subdivision working mode. <br>
Different kinds of interfaces are brought out on this shield, so you can connect some external devices as you like.
 
 
==Check out these awesome specifications==
* [http://wiki.keyestudio.com/index.php/Ks0173_keyestudio_Nano_ch340  NANO control board compatible ]
* Supports the software [https://drive.google.com/open?id=1JSCtHr7FLF7UMxXeVGpwMbWn3BVZo7jh GrblController361Setup]
* Can drive the X/Y/Z-axis stepper motors
* Control the drive module via jumper cap. ('''Note:''' If connect the [http://www.keyestudio.com/keyestudio-reprap-stepper-motor-driver.html A4988], unplug three jumpers, as full-step mode; if plug the jumpers, 16-subdivision working mode.)
* Comes with three 4pin headers of 2.54mm pitch for 42 step motor connection.
* You can directly plug 3 [http://www.keyestudio.com/keyestudio-drv8825-stepper-motor-driver-for-3d-printer.html stepper motor drive modules] into this shield, default X_STP (connected to D2); X_DIR (D5); Y_STP (D3); Y_DIR(D6); Z_STP (D4); Z_DIR(D7).
* The enabled port (EN) of all drive modules has been connected to D8.
* Can supply the power for 3 stepper motor drive modules and Nano board via an external power jack (DC 12V).
* Other communication ports, like the serial communication, I2C communication.
<br>[[Image:KS0152 -图片2.jpg|800px|frameless]]<br>
 
 
==Technical Details==
*Dimensions: 72mm x 59mm x15mm
*Weight: 31g
<br>[[Image:Ks0152-图片3.png|800px|frameless]]<br>
 
 
==Pinout Instructions==
<br>[[Image:KS0152 引脚图.jpg|900px|frameless]]<br>
 
 
==Using Method==
When using this shield, on the hardware, you need to use it with the control board ([http://wiki.keyestudio.com/index.php/Ks0173_keyestudio_Nano_ch340  Nano board ] ), the drive board (such as [http://www.keyestudio.com/keyestudio-reprap-stepper-motor-driver.html A4988]), the motor (42 stepper motor) and others. And you need to burn the firmware to the control board. So need to use the software [http://wiki.keyestudio.com/index.php/How_to_Download_Arduino_IDE Arduino IDE], and the special upper computer software, such as [https://drive.google.com/open?id=1JSCtHr7FLF7UMxXeVGpwMbWn3BVZo7jh GrblController361Setup software].<br>


For detailed use, refer to our [http://wiki.keyestudio.com/index.php/Ks0096_keyestudio_CNC_Kit_/_CNC_Shield_V4.0_%2B_Nano_3.0%2B3pcs_a4988_Driver_/_GRBL_Compatible  keyestudio CNC kit] on wiki website.


==Specification==
* 3 axis stepper motor driver
* Compatible with micro-drive laser engraving machine, three-axis CNC engraving machine,.
* 2A can be controlled within the two-phase four-wire stepper motor.
* Released the digital IO interface, easy to connect to other modules, such as ENDSTOP.
* Released the I2C interface, you can connect to the LCD I2C or other I2C module.
* Power DC5V interface, 7.5-12V voltage input.
* GRBL compatible
* Worked with arduino nano.


==Resources ==


'''Datasheet'''
== Resources ==
*[https://drive.google.com/open?id=1QN6Tv1KrA0qKBixh_JJEpWq4snbWXAnR  You can click here to download the PDF]


http://www.keyestudio.com/files/index/download/id/1464577344/


==Get One Now ==
==Get One Now ==
'''Official Website'''


http://www.keyestudio.com/keyestudio-cnc-shield-v4-0-board-compatible-with-arduino-nano-free-shipping.html
* '''Official Website:'''  http://www.keyestudio.com/ks0152.html
 
* [https://www.ebay.com/itm/132597066215  Buy from eBay ]
 
*[https://www.aliexpress.com/item/NEW-Keyes-CNC-shield-v4-0-3-axis-stepper-motor-drive-board-compatible-with-arduino-nano/32577129659.html?spm=2114.search0104.3.16.112868e2lMSkz8&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10151_10065_10344_10068_10342_10325_10546_10343_10340_10548_10341_10696_10084_10083_10618_10307_5012520_10059_5012620_100031_10103_10624_10623_10622_10621_10620,searchweb201603_1,ppcSwitch_7&algo_expid=b2ed7c9a-254c-4ee8-8ee0-b5b80ff4af87-2&algo_pvid=b2ed7c9a-254c-4ee8-8ee0-b5b80ff4af87&priceBeautifyAB=0  Buy from AliExpress ]
 
 
 


[[Category: shield]]
  [[Category: Shield]]

Latest revision as of 13:17, 14 August 2018


Keyestudio CNC Shield V4


Introduction

keyestudio CNC shield V4 is used as driving shield for engraving machines, fully compatible with NANO control board . So you just need to stack the Nano board onto the shield when using.
It has total 3-way pin slots for stepper motor drive modules (Not Included) to drive 3-channel stepper motors.
Each stepper motor only needs 2 IO ports, so 6 IO ports is enough to manage 3 stepper motors, very easy to use. This shield can make quick work for managing stepper motors in your project.
To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode by plugging or unplugging the jumper cap.
For example, connect the A4988 to the shield, unplug three jumpers, it is in full-step mode; if plug all the jumpers, it is 16-subdivision working mode.
Different kinds of interfaces are brought out on this shield, so you can connect some external devices as you like.


Check out these awesome specifications

  • NANO control board compatible
  • Supports the software GrblController361Setup
  • Can drive the X/Y/Z-axis stepper motors
  • Control the drive module via jumper cap. (Note: If connect the A4988, unplug three jumpers, as full-step mode; if plug the jumpers, 16-subdivision working mode.)
  • Comes with three 4pin headers of 2.54mm pitch for 42 step motor connection.
  • You can directly plug 3 stepper motor drive modules into this shield, default X_STP (connected to D2); X_DIR (D5); Y_STP (D3); Y_DIR(D6); Z_STP (D4); Z_DIR(D7).
  • The enabled port (EN) of all drive modules has been connected to D8.
  • Can supply the power for 3 stepper motor drive modules and Nano board via an external power jack (DC 12V).
  • Other communication ports, like the serial communication, I2C communication.


KS0152 -图片2.jpg


Technical Details

  • Dimensions: 72mm x 59mm x15mm
  • Weight: 31g


Ks0152-图片3.png


Pinout Instructions


KS0152 引脚图.jpg


Using Method

When using this shield, on the hardware, you need to use it with the control board (Nano board ), the drive board (such as A4988), the motor (42 stepper motor) and others. And you need to burn the firmware to the control board. So need to use the software Arduino IDE, and the special upper computer software, such as GrblController361Setup software.

For detailed use, refer to our keyestudio CNC kit on wiki website.


Resources


Get One Now