Ks0170 keyestudio MPU6050 Gyroscope and Accelerometer module

From Keyestudio Wiki
Revision as of 16:22, 15 November 2017 by Keyestudio (talk | contribs) (→‎Buy From)
Jump to navigation Jump to search

keyestudio MPU6050 Gyroscope and Accelerometer Module


thumb

Introduction

The MPU-6050 is the world’s first integrated 9-axis MotionTracking device that combines a 3-axis MEMS gyroscope, 3-axis MEMS accelerometer, and a Digital Motion Processor (DMP). With its dedicated I2C sensor bus, it directly accepts inputs from an external 3-axis compass to provide a complete 9-axis output. The MPU-6050 is also designed to interface with multiple non-inertial digital sensors, such as pressure sensors.
The MPU-6050 features three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and three 16-bit ADCs for digitizing the accelerometer outputs. For precision tracking of both fast and slow motions, the parts feature a user-programmable gyroscope full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) and a user-programmable accelerometer full-scale range of ±2g, ±4g, ±8g, and ±16g.


thumb

Specification

  • Chip: MPU-6050
  • Power supply: 3-5V(Internal low offset voltage )
  • Communication method: standard IIC protocol
  • Built in 16-bit analog-to-digital converter, 16-bit data output
  • Gyroscope range: ±250 500 1000 2000°/sec
  • Accelerometer range: ±2±4±8±16g
  • Pin pitch: 2.54mm


Buy From

Official Website

http://www.keyestudio.com/keyestudio-gy-521-mpu6050-3-axis-gyroscope-and-accelerometer-module-for-arduino-pdf.html