Ks0174 keyestudio HM-10 Bluetooth-4.0 V2: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
Line 57: Line 57:
<br>
<br>
== Resources ==
== Resources ==
* '''PDF File:'''<br>
https://drive.google.com/open?id=1IXjIFG6mqyAJPJ5mj4lPFEKxSVbCrPaz


* '''Code:'''<br>
With respect to APP, Code and PDF file, get more details in the following link
https://drive.google.com/open?id=1bh5Ze_To6D1pbqrnljZwR2vTioGBTNze
https://fs.keyestudio.com/KS0174


* '''APP HC-COM:'''<br>
https://drive.google.com/open?id=18m7X9dBpNTfcAFRn1rq-3Qg6NH7HuTI3
https://drive.google.com/open?id=1tbjdbMVIiOkrhrps-h3sR517Qg9iTCp6


* '''Video:'''<br>
* '''Video:'''<br>

Revision as of 16:01, 2 June 2020


Introduction

keyestudio HM-10 Bluetooth-4.0 V2 adopts TI CC2541 chip, configuration space of 256Kb.
It supports AT command. Users can modify working mode (master/slave), baud rate, device name, paring password, etc.

thumb


Specification

  • Bluetooth protocol: Bluetooth Specification V4.0 BLE
  • No byte limit in serial port Transceiving
  • In open environment, realize 100m ultra-distance communication with iphone4s
  • USB protocol: USB V2.0
  • Working frequency: 2.4GHz ISM band
  • Modulation method: GFSK(Gaussian Frequency Shift Keying)
  • Transmission power: -23dbm, -6dbm, 0dbm, 6dbm, can be modified by AT command.
  • Sensitivity: ≤-84dBm at 0.1% BER
  • Transmission rate: Asynchronous: 6K bytes ; Synchronous: 6k Bytes
  • Security feature: Authentication and encryption
  • Supporting service: Central & Peripheral UUID FFE0, FFE1
  • Power consumption: Auto sleep mode, stand by current 400uA~800uA, 8.5mA during transmission.
  • Power supply: 5V DC
  • Working temperature: –5 to +65 Centigrade


Circuit Connection


thumb


Sample Code

int val; 
int ledpin=13; 
void setup() 
{ 
Serial.begin(9600);
 pinMode(ledpin,OUTPUT); 
} void loop()
{ val=Serial.read(); 
if(val=='a')
 { 
digitalWrite(ledpin,HIGH); 
delay(250); 
digitalWrite(ledpin,LOW); 
delay(250);
 Serial.println("keyestudio");
}
}


Result

Open APP HC-COM, click search device, select the device, device is connected; the LED on the Bluetooth module is on. Enter “a” in HC-COM, click send, Bluetooth APP will display keyestudio. Every time HC-COM sends an “a”, the Pin13 LED on the main board blinks once.
thumb


Resources

With respect to APP, Code and PDF file, get more details in the following link https://fs.keyestudio.com/KS0174


  • Video:

http://video.keyestudio.com/ks0174/


Get One Now

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0174_keyestudio_HM-10_Bluetooth-4.0_V2&oldid=26967"