Ks0224 keyestudio EASY plug Red LED Module

From Keyestudio Wiki
Revision as of 13:31, 15 April 2019 by Keyestudio (talk | contribs)
Jump to navigation Jump to search


Keyestudio EASY plug Red LED Module


Introduction

This is a special EASY plug red LED module. When connecting to ARDUINO, after programming, it can emit red light. For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 You should connect the LED module to control board for communication using an RJ11 cable. You can combine with other sensors to do various interactive experiments. You can also choose other LED modules to emit different light color like blue, green, yellow and white.
thumb


Features

  • Interface: Easy plug
  • Sensor type: Digital
  • Working voltage: 5V
  • LED color: red
  • Easy to use
  • Useful for light projects


Technical Details

  • Dimensions: 34mm*20mm*18mm
  • Weight: 3.8g


Connect It Up

Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.


Upload the Code

Copy and paste below code to Arduino IDE and upload. 

int led = 9;
void setup()
{
pinMode(led, OUTPUT);//Set Pin9 as output
}
void loop()
{
digitalWrite(led, HIGH);//Turn led on
delay(1000);
digitalWrite(led, LOW);//Turn led off
delay(1000);
}


What You Should See

The LED will flash on for one second, then off for one second.
If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.


Resources

Download the PDF:
https://drive.google.com/open?id=191fvxHncuYVMyIjZG4oG5M10Q7jdGvUT



Buy from

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0224_keyestudio_EASY_plug_Red_LED_Module&oldid=16012"