Ks0226 keyestudio EASY plug Yellow LED Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 29: Line 29:
== Connect It Up ==
== Connect It Up ==
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.<br>
Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.<br>
<br>[[File:Ks0226-2.png|600px|frameless|thumb]]<br>
<br>[[File:Ks0226-2.png|500px|frameless|thumb]]<br>


<br>
<br>
== Upload the Code ==
== Upload the Code ==
Below is an example code for LED blinking. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly  Mixly Blocks] and upload. <br>
Below is an example code for LED blinking. Open or drag below code to [https://wiki.keyestudio.com/Getting_Started_with_Mixly  Mixly Blocks] and upload. <br>

Revision as of 13:46, 8 May 2019


Keyestudio EASY plug Yellow LED Module


Introduction

This is a special EASY plug yellow LED module. When connecting to ARDUINO, after programming, it can emit yellow light.
For easy use, the module’s 3pin are brought out as a crystal head socket. The socket is compatible with EASY plug Control board V2.0 You should connect the LED module to control board for communication using an RJ11 cable.
You can combine with other sensors to do various interactive experiments. You can also choose other LED modules to emit different light color like blue, red, green and white.


Features

  • Interface: Easy plug
  • Sensor type: Digital
  • Working voltage: 5V
  • LED color: yellow
  • Easy to use
  • Useful for light projects


Technical Details

  • Dimensions: 34mm*20mm*18mm
  • Weight: 3.8g


Connect It Up

Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.

thumb


Upload the Code

Below is an example code for LED blinking. Open or drag below code to Mixly Blocks and upload.

thumb


What You Should See


thumb

The LED will flash on for one second, then blink off for one second.

thumb

If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.


Little Knowledge:
If you want to make the LED flash on and off more quickly or slowly, you can modify the Delay time here.

thumb



Resources

Download the Arduino Code:
https://drive.google.com/open?id=1C7MkvwE052i3dmMCymFvozMadzyjK6_0

Download the Mixly Code and datasheet:
https://drive.google.com/open?id=13x92dDwyjX5Omxl8yS6y0tZZC8swnegg


Buy from