Ks0229 keyestudio EASY plug Digital Green LED Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
Line 47: Line 47:


'''Download the PDF:'''<br>
'''Download the PDF:'''<br>
https://drive.google.com/open?id=1FcoeYNpAbLmZMNY_LEqy6tQnWlBLxTxt
https://drive.google.com/open?id=1nPsN7XYPcfNdOvvuaP-bf5p8FjBJKBJE


<br>
<br>

Revision as of 09:40, 28 November 2018

Keyestudio EASY plug Digital Green LED Module


Introduction

The LED light module has a shiny color, ideal for emitting green light. It can be easily connected to Arduino IO/Sensor shield.
Note: this module needs to be used together with EASY plug control board.You can also choose other LED modules to emit different light color like blue, red, yellow and white.


Specification

  • Interface: Easy plug
  • Sensor type: Digital
  • PH2.54 socket
  • Easy to use
  • Useful for light projects


Connect It Up

Connect the EASY Plug LED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.
thumb

Sample Code

Copy and paste below code to Arduino IDE and upload.

int led =6;
void setup()
{
pinMode(led, OUTPUT);//Set Pin6 as output
}
void loop()
{
digitalWrite(led, HIGH);//Turn led on
delay(2000);
digitalWrite(led, LOW);//Turn led off
delay(2000);
}


What You Should See

The LED will flash on for two seconds, then off for two seconds. If it doesn’t, make sure you have assembled the circuit correctly and verified and uploaded the code to your board.
thumb


Resources

Download the PDF:
https://drive.google.com/open?id=1nPsN7XYPcfNdOvvuaP-bf5p8FjBJKBJE


Buy from