|(2 intermediate revisions by the same user not shown)|
==EASY plug V2.0 Control Board ==
core of the EASY plug Control board V2.0 Control board is ATmega328.<br>
The processor EASY plug board V2.0 is ATmega328. <br>
Development board IO port with crystal head leads, and couples with power supply interface can allows you to connect external sensors and module with a line, so you don't worry that the wrong wiring will damage the external wiring products.<br>
port with , and
The development board leads to five digital ports input/output (including three PWM outputs), four analog input interfaces, one dual-digital interface, one SPI communication interface, one serial port communication interface, one IIC communication interface and one joystick module interface.<br>
with power you to connect external module, don't worry that the wrong wiring will damage the external products.<br>
* Microcontroller core: ATmega328P-PU
* Working voltage: +5V
* External input voltage：+7V~+12V（suggest）
* External input voltage ( extremum ): +6V≤ Vin ≤ ＋20V
* Digital signal I/O interface: 5 (of which 3provide PWM output)
* Analog signal input interface: 4
* DCI/O interface current: 20mA
* FlashMemory: 32KB (ATmega328) of which 0.5 KB used by bootloader
* SRAM static storage capacity:2KB
* EEPROM storage capacity: 1KB
* Clock frequency：16MHZ
Following is a board test example called “Hello World！”. <br>
First, open Arduino IDE. In this example sketch, we program Arduino to display “Hello World！” in serial monitor when it receives a specific character string “R”; At the same time, the on- board D13 LED will blink once each time it receives “R”. <br>
First, set up board; In “Tools”, select “Arduino Uno”. <br>
<br>[[ File: KS0240-2.png| 500px|frameless |thumb]] <br>
set up COM port; In “Tools”, select “COM3”.
File: KS0240- 3.png| 500px|frameless| thumb]]<br>
After selection, you can see that indicated area is the same with settings in “Device manager”.
to . . .
Copy the example sketch and paste it to the IDE; then click “Verify [[File:KS0240-5. png|500px|frameless|thumb]]” to check compiling mistakes; click “Upload [[File:KS0240-6. png|500px|frameless|thumb]]” to upload the program on the board.
File: KS0240-7.png| 500px|frameless |thumb]]<br>
uploading is done, open “serial monitor[[File:KS0240-8.png|500px|frameless|thumb]]”; enter “R”; click “Send”, the serial monitor will display “Hello World!” and the D13 LED will blink once.
After , the the .
File: KS0240-9.png| 500px|frameless |thumb]]<br>
https:// drive. google.com/ open?id=1uNuMtWmYw55fxP6lKMd_oA8UKLbl-b8H
=Buy from ==
[[Category: Arduino Board]]
[[Category: Arduino Board]]
Keyestudio EASY plug Control Board V2.0
The processor used in keyestudio EASY plug control board V2.0 is ATmega328.
It has 5 single Digital ports labeled D5 to D9 (of which 3 can be used as PWM outputs), 1 dual-digital interface (D3-D4), 4 analog inputs (A0-A3), a Joystick interface (D2-A6-A7), a SPI communication, a serial port communication and an IIC communication interface. Also with a USB connection, a power jack, two ICSP headers and a reset button. It breaks out the IO ports with RJ11 6P6C plug.
Simply connect it to a computer with a USB cable or power it via a DC jack to get started. For convenience of wire connection, we simplify the pins GND and VCC into each plug, so you only need one RJ11 6P6C connector wire to connect an external sensor or module, no need to separately connect the VCC and GND. So don't worry that the wrong wiring will damage the external products.
|Input Voltage (recommended)
|Single Digital Ports
||5 (D5-D9) (of which 3 provide PWM output)
|PWM Digital Ports
||D5, D6, D9
|Analog Input Pins
|DC Current per I/O Pin
||32KB (ATmega328) of which 0.5 KB used by bootloader
- PCB Dimensions: 100mm x 65mm x 18mm
- Weight: 55.5g
Element and Interfaces
Here is an explanation of what every element and interface of the board does:
Detailed Use with ARDUINO Software as follows:
Step1 | Download the Arduino environment (IDE)
When you get the board, first you should install the Arduino software and driver.
We usually use the Windows software Arduino 1.5.6 version. You can download it from the link below:
Or you can browse the ARDUINO website to download the latest version from this link, https://www.arduino.cc, pop up the following interface.
Then click the SOFTWARE on the browse bar, you will have two options ONLINE TOOLS and DOWNLOADS.
Click DOWNLOADS, it will appear the latest software version of ARDUINO 1.8.5 shown as below.
In this software page, on the right side you can see the version of development software for different operating systems. ARDUINO has a powerful compatibility. You should download the software that is compatible with the operating system of your computer.
We will take WINDOWS system as an example here. There are also two options under Windows system, one is installed version, the other is non-installed version.
For simple installed version, first click Windows Installer, you will get the following page.
This way you just need to click JUST DOWNLOAD, then click the downloaded file to install it.
For non-installed version, first click Windows ZIP file, you will also get the pop-up interface as the above figure.
Click JUST DOWNLOAD, and when the ZIP file is downloaded well to your computer, you can directly unzip the file and click the icon of ARDUINO software to start it.
Installing Arduino (Windows)
Install Arduino with the exe. Installation package downloaded well.
Click“I Agree”to see the following interface.
Click “Next”. Pop up the interface below.
You can press Browse… to choose an installation path or directly type in the directory you want.
Then click “Install” to initiate installation.
Wait for the installing process, if appear the interface of Window Security, just continue to click Install to finish the installation.
Introduction for Arduino IDE Toolbar
Double-click the icon of Arduino software downloaded well, you will get the interface shown below.
(Note: if the Arduino software loads in the wrong language, you can change it in the preferences dialog. See the environment page for details.)
The functions of each button on the Toolbar are listed below:
||Check the code for errors
||Upload the current Sketch to the Arduino
||Create a new blank Sketch
||Show a list of Sketches
||Save the current Sketch
| Serial Monitor
||Display the serial data being sent from the Arduino
Next, we will introduce the driver installation of board. The driver installation may have slight differences in different computer systems. So in the following let’s move on to the driver installation in the WIN 7 system.
The Arduino folder contains both the Arduino program itself and the drivers that allow the Arduino to be connected to your computer by a USB cable. Before we launch the Arduino software, you are going to install the USB drivers.
Plug one end of your USB cable into the board and the other into a USB socket on your computer.
When you connect the board to your computer at the first time, right click the icon of your “Computer” —>for “Properties”—> click the “Device manager”, under “Other Devices”, you should see an icon for “Unknown device” with a little yellow warning triangle next to it. This is your Arduino.
Then right-click on the device and select the top menu option (Update Driver Software...) shown as the figure below..
It will then be prompted to either “Search Automatically for updated driversoftware” or “Browse my computer for driver software”. Shown as below. In this page, select “Browse my computer for driver software”.
After that, select the option to browseand navigate to the “drivers” folder of Arduino installation.
Click “Next” and you may get a security warning, if so, allow the software to be installed. Shown as below.
Once the software has been installed, you will get a confirmation message. Installation completed, click “Close”.
Up to now, the driver is installed well. Then you can right click “Computer” —>“Properties”—>“Device manager”, you should see the device as the figure shown below.
Step2| Connect the board
Connect the board to your computer using the USB cable. The power LED should go on.
Step3| Select the Arduino Board
Open the Arduino IDE, you’ll need to click the “Tools”, then select the Board that corresponds to your Arduino.
Step4| Select the Serial Port
Select the serial device of the Arduino board from the Tools | Serial Port menu.
Note: to avoid errors, the COM Port should keep the same as the Ports shown on Device Manager.
Step5| Upload the Code
Below is an example code for displaying the Hello World!
Copy and paste the code to the Arduino environment IDE.
Then click verify button to check the errors. If compiling successfully, the message "Done compiling." will appear in the status bar.
After that, click the “Upload” button to upload the code. If the upload is successful, the message "Done uploading." will appear in the status bar. (Note: If you have an Arduino Mini, NG, or other board, you'll need to physically present the reset button on the board immediately before pressing the upload button.)
Step6| Open the Serial Monitor
After that, click the serial monitor button to open the serial monitor.
Then set the baud rate as 9600, enter an “R” and click Send, you should see the RX led on the board blink once, and then D13 led blink once, finally "Hello World!" is showed on the monitor, the TX led blink once. Congrats!
You can download the datasheet from the link:
You might also want to look at:
the reference for the Arduino language;
Download ARDUINO Software:
- Keyestudio Easy plug control board V2 * 1pcs
- Acrylic panel* 2pcs
- 30cm blue RJ11 cable * 1pcs
- 1m black USB cable * 1pcs
- M3*15mm copper pillar * 4pcs
- M3*10mm round-head screw * 8pcs