Ks0260 keyestudio TTP229L 16-key Touch Sensor

From Keyestudio Wiki
Revision as of 11:28, 18 April 2019 by Keyestudio (talk | contribs)
Jump to navigation Jump to search


Introduction

This is a 16-key digital capacitive touch switch sensor, using the working mode of capacitive sensing trigger. Its communication is I2C communication, with simple and convenient wiring.

thumb


Specification

  • Onboard TTP229 capacitive 16-key touch sensor IC
  • Onboard power indicator
  • Working voltage: 2.4V-5.5V
  • Support to set the output mode, key output mode, the longest output time and fast / low power options


Details


thumb

thumb


Connection Diagram


thumb


Sample Code


#include "TTP229L_I2C.h"
void setup()

{
  Serial.begin(9600);
}

void loop()
{
unsigned int dat;
dat=TTP229_i2c_read();
Serial.println(dat);
delay(1000);
}



Result

After uploading the code to the UNO board, connect the UNO board to TTP229L module.
Powered up, you can see the red LED on the module is on, then open the serial monitor, touch the key with finger and you can see the corresponding value as the figure shown below:

thumb

thumb


Resources

  • PDF File:

https://drive.google.com/open?id=1ThEcBDD2GP7cdmRkj9FlMhmemZlHo6Bq

  • Library Download of TTP229L_I2C:

https://drive.google.com/open?id=1rLWLBc2vRFyBpH_MW9fl-b6lImAXkQez



Get One Now