Ks0288 keyestudio CNC GRBL V0.9: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 20: Line 20:


'''（1）Install Diver Software'''
'''（1）Install Diver Software'''
For different operating system, there may be slight difference in installation method. Below is an example in WIN 7.
For different operating system, there may be slight difference in installation method. Below is an example in WIN 7.
a.When you connect Keyestudio CNC GRBL V0.9 to your computer at the first time, right click “Computer” —>“Properties”—> “Device manager”, you can see “USB2.0-Serial”. Shown below.
a.When you connect Keyestudio CNC GRBL V0.9 to your computer at the first time, right click “Computer” —>“Properties”—> “Device manager”, you can see “USB2.0-Serial”. Shown below.
 
<br>[[File:图片1-.png|500px|frameless|thumb]]<br>


b.Click “USB2.0-Serial”, select “Update Driver software”.
b.Click “USB2.0-Serial”, select “Update Driver software”.
 
<br>[[File:图片2.png|500px|frameless|thumb]]<br>


c.Then, click “Browse my computer for driver software”.
c.Then, click “Browse my computer for driver software”.
 
<br>[[File:图片3.png|500px|frameless|thumb]]<br>


d.Find the “usb_ch341_3.1.2009.06” file.  
d.Find the “usb_ch341_3.1.2009.06” file.  
<br>[[File:图片4.png|500px|frameless|thumb]]<br>


e.Click “Next”,Installation completed; click “Close”.  
e.Click “Next”,Installation completed; click “Close”.  
<br>[[File:图片5.png|500px|frameless|thumb]]<br>


f.After driver is installed, go to “Device manager” again. right click “Computer” —>  “Properties”—> “Device manager”, you can see the Board and Com port as below figure shown.
<br>[[File:图片6.png|500px|frameless|thumb]]<br>


f.After driver is installed, go to “Device manager” again. right click “Computer” —>  “Properties”—> “Device manager”, you can see the Board and Com port as below figure shown.
'''(2) Install Development Environment Software IDE'''


a.Double click arduino-1.5.6-r2-windows to start. 
Select “I Agree”to accept license agreement.
== Heading text ==
== Heading text ==
== Heading text ==
== Heading text ==

Revision as of 12:01, 28 November 2017

Keyestudio CNC GRBL V0.9


thumb

Introduction

Keyestudio CNC GRBL V0.9 is a motherboard developed for various robots such as laser engraving, CNC, writing robot and so on. It has complete interfaces with cheap price, and can connect external drive, very suitable for DIY or factory use.

Specification

  • Microprocessor：MEGA328p
  • Input voltage: DC 12V
  • File supporting format：Gcode
  • Supporting machine structure：CNC，laser engraving，writing robot.

Pin Explanation


thumb

Wiring Diagram


thumb

Install Driver Software and Development Environment Software IDE

（1）Install Diver Software

For different operating system, there may be slight difference in installation method. Below is an example in WIN 7. a.When you connect Keyestudio CNC GRBL V0.9 to your computer at the first time, right click “Computer” —>“Properties”—> “Device manager”, you can see “USB2.0-Serial”. Shown below.
thumb

b.Click “USB2.0-Serial”, select “Update Driver software”.
thumb

c.Then, click “Browse my computer for driver software”.
thumb

d.Find the “usb_ch341_3.1.2009.06” file.
thumb

e.Click “Next”,Installation completed; click “Close”.
thumb

f.After driver is installed, go to “Device manager” again. right click “Computer” —> “Properties”—> “Device manager”, you can see the Board and Com port as below figure shown.
thumb

(2) Install Development Environment Software IDE

a.Double click arduino-1.5.6-r2-windows to start. Select “I Agree”to accept license agreement.

Heading text

Heading text

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0288_keyestudio_CNC_GRBL_V0.9&oldid=5719"