Ks0288 keyestudio CNC GRBL V0.9

From Keyestudio Wiki
Jump to navigation Jump to search

Keyestudio CNC GRBL V0.9


thumb

Introduction

Keyestudio CNC GRBL V0.9 is a motherboard developed for various robots such as laser engraving, CNC, writing robot and so on. It has complete interfaces with cheap price, and can connect external drive, very suitable for DIY or factory use.

Specification

  • Microprocessor：MEGA328p
  • Input voltage: DC 12V
  • File supporting format：Gcode
  • Supporting machine structure：CNC，laser engraving，writing robot.

Pin Explanation


thumb

Wiring Diagram


thumb

Install Driver Software and Development Environment Software IDE

（1）Install Diver Software For different operating system, there may be slight difference in installation method. Below is an example in WIN 7. a.When you connect Keyestudio CNC GRBL V0.9 to your computer at the first time, right click “Computer” —>“Properties”—> “Device manager”, you can see “USB2.0-Serial”. Shown below.


b.Click “USB2.0-Serial”, select “Update Driver software”.


c.Then, click “Browse my computer for driver software”.


d.Find the “usb_ch341_3.1.2009.06” file.

e.Click “Next”,Installation completed; click “Close”.


f.After driver is installed, go to “Device manager” again. right click “Computer” —> “Properties”—> “Device manager”, you can see the Board and Com port as below figure shown.

Heading text

Heading text

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0288_keyestudio_CNC_GRBL_V0.9&oldid=5711"