Ks0417 Keyestudio micro:bit 1W LED Module: Difference between revisions
Jump to navigation
Jump to search
Keyestudio (talk | contribs) No edit summary |
Keyestudio (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
[[image:Ks0417-1.png|thumb| | [[image:Ks0417-1.png|thumb|300px|right|keyestudio 1W LED Module For BBC micro:bit]] | ||
<br> | <br> | ||
| Line 18: | Line 18: | ||
* Weight: 2.4g | * Weight: 2.4g | ||
* Environmental attributes: ROHS | * Environmental attributes: ROHS | ||
<br>[[File:Ks0417-2.png| | <br>[[File:Ks0417-2.png|500px|frameless|thumb]]<br> | ||
<br> | <br> | ||
== Connection Diagram== | == Connection Diagram== | ||
[[File:Ks0417-5.png| | [[File:Ks0417-5.png|500px|frameless|thumb]]<br> | ||
<br> | <br> | ||
== Source Code == | == Source Code == | ||
[[File:Ks0417-3.png| | [[File:Ks0417-3.png|500px|frameless|thumb]]<br> | ||
<br> | <br> | ||
== Example Result == | == Example Result == | ||
Connect well the module, then send the source code to the micro:bit main board. Powered on, the LED on the module should flash for one second, then off for one second, circularly and alternately. | Connect well the module, then send the source code to the micro:bit main board. Powered on, the LED on the module should flash for one second, then off for one second, circularly and alternately.<br> | ||
[[File:Ks0417-4.png| | [[File:Ks0417-4.png|600px|frameless|thumb]]<br> | ||
<br> | <br> | ||
Revision as of 13:19, 2 April 2019
Description
This LED module is fully compatible with micro:bit control board. It will emit the white light. The max operating current is 400mA; the maximum power is 1W.
When using, connect the LED module to micro:bit control board using Crocodile clip line.
There are total 6 rings on the module. Two G rings, two V rings and two S rings are separately connected.
When using, G ring for ground; V for 3V; S for signal pin (0 1 2). When signal end is HIGH, LED lights.
Technical Parameters
- Working voltage: DC 3.0-3.3V
- Working current: 400mA
- Power: 1W
- Light Color: white
- Size: 31mm*27mm*8mm
- Weight: 2.4g
- Environmental attributes: ROHS
Connection Diagram
Source Code
Example Result
Connect well the module, then send the source code to the micro:bit main board. Powered on, the LED on the module should flash for one second, then off for one second, circularly and alternately.
