Ks0417 Keyestudio micro:bit 1W LED Module

From Keyestudio Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
keyestudio 1W LED Module For BBC micro:bit


Description

This LED module is fully compatible with micro:bit control board. It will emit the white light. The max operating current is 400mA; the maximum power is 1W.
When using, connect the LED module to micro:bit control board using Crocodile clip line.
There are total 6 rings on the module. Two G rings, two V rings and two S rings are separately connected.
When using, G ring for ground; V for 3V; S for signal pin (0 1 2). When signal end is HIGH, LED lights.

Technical Parameters

  • Working voltage: DC 3.0-3.3V
  • Working current: 400mA
  • Power: 1W
  • Light Color: white
  • Size: 31mm*27mm*8mm
  • Weight: 2.4g
  • Environmental attributes: ROHS


thumb


Connection Diagram

thumb


Source Code

thumb


Example Result

Connect well the module, then send the source code to the micro:bit main board. Powered on, the LED on the module should flash for one second, then off for one second, circularly and alternately.
thumb


Resources

  • Download relevant datasheet and code:

https://fs.keyestudio.com/KS0417



Get One Now