Ks0418 Keyestudio micro:bit 5050 RGB Module: Difference between revisions
Jump to navigation
Jump to search
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) |
||
| Line 39: | Line 39: | ||
<br> | <br> | ||
==Get One Now== | |||
*[https://www.aliexpress.com/store/product/keyestudio-5050-RGB-Module-For-BBC-micro-bit/1452162_32997681000.html?spm=2114.12010611.8148356.5.3f896c0eHzY5BG Shop on aliexpress ] | |||
[[Category: Micro:bit]] | [[Category: Micro:bit]] | ||
Revision as of 08:49, 30 April 2019
Description
This module mainly contains a 5050 RGB LED, fully compatible with micro:bit control board.
When using, connect the RGB module to micro:bit control board using Crocodile clip line.
There are total 6 rings on the module. Note that three V rings are connected. V ring for 3V; R G B ring is separately connected to signal pin (0 1 2) of micro:bit main board.
When three signal pins are LOW, module will gradually show red, green and blue light.
Technical Parameters
- Working voltage: DC 3.0-3.3V
- Control mode: active LOW(common anode)
- Size: 31mm*27mm*3mm
- Weight: 1.8g
- Environmental attributes: ROHS
Connection Diagram
Source Code
Example Result
Connect well the module, then send the source code to the micro:bit main board. Powered on, the LED on the module will alternately flash red, blue and green light.
Resources
Download all relevant info. below:
https://drive.google.com/open?id=1Dx3R4xA8uJU156L1ZyM8aUjYz7pMRdLw