Ks0418 Keyestudio micro:bit 5050 RGB Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
Line 52: Line 52:
*[https://www.aliexpress.com/store/product/keyestudio-5050-RGB-Module-For-BBC-micro-bit/1452162_32997681000.html?spm=2114.12010611.8148356.5.3f896c0eHzY5BG    Shop on aliexpress ]
*[https://www.aliexpress.com/store/product/keyestudio-5050-RGB-Module-For-BBC-micro-bit/1452162_32997681000.html?spm=2114.12010611.8148356.5.3f896c0eHzY5BG    Shop on aliexpress ]


 
*[https://www.keyestudio.com/keyestudio-5050-rgb-module-for-bbc-microbit-p0534-p0534.html  Official website]




  [[Category: Micro:bit]]
  [[Category: Micro:bit]]

Revision as of 17:52, 25 July 2019

keyestudio 5050 RGB Module For BBC micro:bit


Description

This module mainly contains a 5050 RGB LED, fully compatible with micro:bit control board.
When using, connect the RGB module to micro:bit control board using Crocodile clip line.
There are total 6 rings on the module. Note that three V rings are connected. V ring for 3V; R G B ring is separately connected to signal pin (0 1 2) of micro:bit main board.
When three signal pins are LOW, module will gradually show red, green and blue light.

Technical Parameters

  • Working voltage: DC 3.0-3.3V
  • Control mode: active LOW(common anode)
  • Size: 31mm*27mm*3mm
  • Weight: 1.8g
  • Environmental attributes: ROHS


thumb


Connection Diagram

thumb


Source Code

thumb


Example Result

Connect well the module, then send the source code to the micro:bit main board. Powered on, the LED on the module will alternately flash red, blue and green light.
thumb

thumb


Resources



Get One Now