Ks0422 keyestudio micro:bit PIR Motion Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
 
(2 intermediate revisions by the same user not shown)
Line 42: Line 42:
When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights.
When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights.
Or else, it will show another image and led turns off.  
Or else, it will show another image and led turns off.  
<br>[[File:Ks0421-5.png|600px|frameless|thumb]]<br>
<br>[[File:0422图片1.png|600px|frameless|thumb]]<br>


<br>
<br>
Line 48: Line 48:
==Resources ==
==Resources ==


*'''Download relevant datasheet and code:''' https://drive.google.com/open?id=1ehxOTPrrb9BJ6OtClH2uaKlS3Pb9VcvT
*'''Download relevant datasheet and code:
 
''' https://fs.keyestudio.com/KS0422'''


* [http://microbit.org/  BBC micro:bit website ] <br>
* [http://microbit.org/  BBC micro:bit website ] <br>
Line 63: Line 65:
*[https://www.aliexpress.com/store/product/keyestudio-PIR-Motion-Sensor-Module-For-BBC-micro-bit/1452162_32997053565.html?spm=2114.12010611.8148356.13.3f896c0eHzY5BG  Shop on aliexpress ]
*[https://www.aliexpress.com/store/product/keyestudio-PIR-Motion-Sensor-Module-For-BBC-micro-bit/1452162_32997053565.html?spm=2114.12010611.8148356.13.3f896c0eHzY5BG  Shop on aliexpress ]


   
*[https://www.keyestudio.com/keyestudio-pir-motion-sensor-module-for-bbc-microbit-p0537-p0537.html Official website]
 
  [[Category: Micro:bit]]
  [[Category: Micro:bit]]

Latest revision as of 11:08, 1 March 2021

keyestudio PIR Motion Module For BBC micro:bit


Description

This keyestudio PIR motion module is fully compatible with micro:bit control board.
It is mainly composed of a digital pyroelectric infrared sensor, which is a digital signal output device.
This sensor has built-in filters, strong anti-interference, low voltage and micro power consumption.
The detection distance of the module is 3-5 meters.
The detection angle in the horizontal direction is less than 80°; the detection angle in the vertical direction is less than 55°
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are separately connected. G for ground; V for 3V; S for signal pin(0 1 2).
When using, connect the module to micro:bit control board using Crocodile clip line.
Once detecting someone moving nearby, the signal pin of micro:bit main board will input HIGH level; LED on the module lights.

Technical Parameters

  • Working voltage: DC 3.0-3.3V
  • Working current: 100mA
  • Maximum power: 0.5W
  • Output signal: digital signal
  • Detection distance: 3-5 meters
  • Detection angle: less than 80°in the horizontal direction and less than 55° in the vertical direction
  • Operating temperature range: -30℃~ +80℃
  • Dimensions: 31mm*27mm*6mm
  • Weight: 2g
  • Environmental attributes: ROHS


thumb


Connection Diagram

thumb


Source Code

thumb


Example Result

Connect well the module, then send the source code to the micro:bit main board.
When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights. Or else, it will show another image and led turns off.
thumb


Resources

  • Download relevant datasheet and code:

https://fs.keyestudio.com/KS0422


Get One Now