Ks0422 keyestudio micro:bit PIR Motion Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
 
Line 48: Line 48:
==Resources ==
==Resources ==


*'''Download relevant datasheet and code:''' https://drive.google.com/open?id=1ehxOTPrrb9BJ6OtClH2uaKlS3Pb9VcvT
*'''Download relevant datasheet and code:
 
''' https://fs.keyestudio.com/KS0422'''


* [http://microbit.org/  BBC micro:bit website ] <br>
* [http://microbit.org/  BBC micro:bit website ] <br>

Latest revision as of 11:08, 1 March 2021

keyestudio PIR Motion Module For BBC micro:bit


Description

This keyestudio PIR motion module is fully compatible with micro:bit control board.
It is mainly composed of a digital pyroelectric infrared sensor, which is a digital signal output device.
This sensor has built-in filters, strong anti-interference, low voltage and micro power consumption.
The detection distance of the module is 3-5 meters.
The detection angle in the horizontal direction is less than 80°; the detection angle in the vertical direction is less than 55°
There are total 6 rings on the module. Note that two G rings, two V rings and two S rings are separately connected. G for ground; V for 3V; S for signal pin(0 1 2).
When using, connect the module to micro:bit control board using Crocodile clip line.
Once detecting someone moving nearby, the signal pin of micro:bit main board will input HIGH level; LED on the module lights.

Technical Parameters

  • Working voltage: DC 3.0-3.3V
  • Working current: 100mA
  • Maximum power: 0.5W
  • Output signal: digital signal
  • Detection distance: 3-5 meters
  • Detection angle: less than 80°in the horizontal direction and less than 55° in the vertical direction
  • Operating temperature range: -30℃~ +80℃
  • Dimensions: 31mm*27mm*6mm
  • Weight: 2g
  • Environmental attributes: ROHS


thumb


Connection Diagram

thumb


Source Code

thumb


Example Result

Connect well the module, then send the source code to the micro:bit main board.
When detecting someone moving nearby, the LED matrix on the micro:bit main board will show a heart shape icon, and led on the PIR module lights. Or else, it will show another image and led turns off.
thumb


Resources

  • Download relevant datasheet and code:

https://fs.keyestudio.com/KS0422


Get One Now