Ks0424 keyestudio micro:bit Passive Buzzer Module

From Keyestudio Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


keyestudio Passive Buzzer Module For BBC micro:bit


Description

This Keyestudio passive buzzer module is fully compatible with micro:bit control boards.
Composed of a passive buzzer without oscillation circuit, it cannot be actuated by itself, but by external pulse frequencies. Different frequencies produce different sounds as well as the melody of a song.
There are total 6 gold-plated rings on the module. Note that two G rings, two V rings and two S rings are connected. G is for ground; V for 3V; S for signal pin(0 1 2).
When using it, you need to connect it to a micro:bit control board through crocodile clip lines.

Technical Parameters

  • Working voltage: DC 3.0-3.3V
  • Output signal: Digital signal (square wave)
  • Dimensions: 31mm*27mm*4.5mm
  • Weight: 2.3g
  • Environmental attributes: ROHS


thumb


Connection Diagram

thumb


Source Code


Code 1：

thumb

Code 2：

thumb


Note:
If you drag the source code we provided to the Microsoft MakeCode Block editor https://makecode.microbit.org/#editor Click the icon thumb , you can check the frequency of each tone as follows:
thumb


Example Result

Connect well the module, then send the source code to the micro:bit main board.
If send the code 1, the buzzer will alternately make two sounds.
If send the code 2, the buzzer will play a song of Ode To Joy.
thumb


Resources

  • Download relevant datasheet and code:

https://fs.keyestudio.com/KS0424



Get One Now

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0424_keyestudio_micro:bit_Passive_Buzzer_Module&oldid=32794"