Ks0479 keyestudio Micro bit Honeycomb Rotary Potentiometer Module: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
Line 22: Line 22:
<br>
<br>
== Wiring Diagram ==  
== Wiring Diagram ==  
<br>[[File:KS0469-2.png|700px|frameless|thumb]]<br>
<br>[[File:Ks04791.png|700px|frameless|thumb]]<br>


<br>
<br>

Revision as of 17:15, 24 March 2020


Keyestudio Micro bit Honeycomb Rotary Potentiometer Module



Description

The keyestudio micro bit honeycomb rotary potentiometer module is fully compatible with micro bit control board. In the experiment, we connect the module to the micro:bit control board using the crocodile clip wire. There are 6 ports on the module. The ports with the same name are connected; when connecting the micro:bit control board, we only need to connect 3 ports. The module uses a 10K adjustable resistor. By rotating the potentiometer, we can change the value of the resistor and then build the circuit to convert the resistance change into the voltage change.



Technical parameters

  • Working voltage: DC 3.0-3.3V
  • Control port: analog port
  • Size: 25mm*28mm*26mm
  • Weight: 6.7g
  • Environmental attributes: ROHS



Wiring Diagram


thumb



Test code


thumb



Test Result

According to connection diagram, upload test code successfully. After power-on, LED dot matrix of the micro:bit control board displays the analog value of the corresponding signal terminal. By rotating the potentiometer on the rotary module, the change of value is displayed on LED matrix.


Resources

Download Test Code:
https://1drv.ms/u/s!ArhgRvK6-RyJg2aPFbvxhC7yxeEc?e=Jrueci




Get One Now

  • [ Official Website]
  • [ Shop on aliexpress ]