Search results

Jump to navigation Jump to search

Page title matches

  • Keyestudio current detection sensor is mainly composed of a current sensor TA12-200, which can convert large current into a small amplitude of voltage ...n be connected to the Arduino dedicated sensor expansion board with the 3P sensor cable.<br>
    3 KB (414 words) - 12:12, 7 January 2021
  • ...well the code, then open the serial monitor, if cover the photocell on the sensor with your hand, you will see the analog value decrease. Shown as below. ...studio.com/free-shipping-keyestudio-photoresistor-light-dependent-resistor-sensor-module-for-arduino-p0394-p0394.html '''Official Website''']
    2 KB (252 words) - 14:47, 7 January 2021
  • Our water sensor is easy- to-use, portable and cost-effective, designed to identify and dete This sensor measures the volume of water drop and water quantity through an array of tr
    3 KB (410 words) - 14:08, 7 January 2021
  • ...nwater detector and liquid level switch. When humidity on the face of this sensor rises, output voltage will increase. val=analogRead(0); //plug vapor sensor into analog port 0
    2 KB (246 words) - 14:26, 7 January 2021
  • ...nwater detector and liquid level switch. When humidity on the face of this sensor rises, output voltage will increase.<br> val=analogRead(0); //plug vapor sensor into analog port 0
    2 KB (269 words) - 10:23, 19 April 2019
  • This flame sensor can be used to detect fire or other lights with wavelength stands at 760nm ...close to the sensor, when the sensor detects the flame, another led on the sensor is turned on.<br>
    2 KB (293 words) - 14:55, 7 January 2021
  • ...'s the simplest way to check vibration with Arduino? Well, use a vibration sensor from keyestudio. <br> You can directly plug it on our sensor Shield V5, vibrate this sensor, and Arduino can receive a digital signal, making it easy to make computati
    2 KB (206 words) - 14:55, 7 January 2021
  • [[Category:Sensor]]
    18 KB (1,995 words) - 14:29, 7 January 2021
  • Collision sensor, also known as electronic switch, is a digital on-off input module necessar Using 3P sensor cable to connect it to sensor shield, it can be installed to 4WD alloy mobile robot platform to realize c
    2 KB (376 words) - 14:41, 7 January 2021
  • * Color Recognition Sensor Module ...on this sensor. The following is the correct connection between this color sensor and Arduino UNO:<br>
    4 KB (642 words) - 10:38, 9 September 2021
  • Tilt sensor is a digital tilt switch. It can be used as a simple tilt sensor. Simply connect the sensor to our IO/Sensor shield, so you can make amazing interactive projects.
    2 KB (286 words) - 14:46, 7 January 2021
  • This is a Magnetic Induction Sensor. It senses the magnetic materials within a detection range up to 3cm. The This sensor uses the SFE Reed Switch - Magnetic Field Sensor.<br>
    2 KB (290 words) - 14:39, 7 January 2021
  • ==18B20 Temperature Sensor== DS18B20 is a digital temperature sensor. It can be used to quantify environmental temperature testing. <br>
    3 KB (365 words) - 14:43, 7 January 2021
  • ...ctronic device. So upgrade your Arduino project with our new version touch sensor and make it cool!!<br> This little sensor can "feel" people and metal touch and feedback a high/low voltage level. Ev
    2 KB (281 words) - 14:50, 7 January 2021
  • All we need to do is to convert the sensor output data into degrees Celsius temperature via simple programming, fina You are able to use keyestudio analog temperature sensor to meansure the current temperature of environment, displaying the data on
    3 KB (382 words) - 14:51, 7 January 2021
  • [[image:0414图片1.png|thumb|400px|right|Keyestudio Turbidity Sensor V1.0]] The keyestudio turbidity sensor detects water quality by measuring level of turbidity. <br>
    4 KB (594 words) - 12:27, 7 January 2021
  • [[image:Ks0407-1.png|thumb|400px|right|keyestudio TCS34725 Color Sensor]] The keyestudio TCS34725 sensor mainly uses TCS34725 color sensor chip. <br>
    4 KB (655 words) - 12:25, 7 January 2021
  • The keyestudio microphone sensor is typically used in detecting the loudness in ambient environment. The Ard ...analog output, that is voltage signal real-time output of microphone. The sensor comes with a potentiometer, so that you can turn it to adjust the signal ga
    2 KB (288 words) - 14:54, 7 January 2021
  • This is a simple soil humidity sensor aims to detect the soil humidity. <br> If the soil is in lack of water, the analog value output by the sensor will decrease; otherwise, it will increase.
    4 KB (632 words) - 14:09, 7 January 2021
  • [[image:ks0006.png|thumb|500px|right|Keyestudio keyestudio MEGA Sensor Shield V1]] Have you met with these troubles? when connecting a couple of sensor modules to MEGA 2560 control board, sometimes power output interfaces are n
    3 KB (437 words) - 17:10, 4 August 2021
  • [[File:KS0004图片1.png|thumb|500px|right|Keyestudio Sensor Shield V5]] In the experiments, you might often use UNO R3 control board and several sensor modules. If the interfaces of power output is not enough, you may need to a
    3 KB (537 words) - 10:15, 29 April 2021
  • This Line Tracking Sensor can detect white lines in black and black lines in white. The single line-t   Serial.println(digitalRead(3)); // print the data from the sensor
    2 KB (208 words) - 14:11, 7 January 2021
  • ...tage can be subdivided into 1024, easy to be connected to Arduino with our sensor shield. Combined with other sensors, we can make interesting projects by r val=analogRead(0);//Read rotation sensor value from analog 0
    1 KB (212 words) - 14:37, 7 January 2021
  • This analog gas sensor - MQ2 is used in gas leakage detecting equipment in consumer electronics an This sensor is suitable for detecting LPG, I-butane, propane, methane, alcohol, Hydroge
    2 KB (241 words) - 16:42, 15 July 2021
  • ...Keyestudio SR01 Ultrasonic Sensor is a very affordable proximity/distance sensor that has been used mainly for object avoidance in various robotics projects ...en used in turret applications, water level sensing, and even as a parking sensor. <br>
    3 KB (449 words) - 14:30, 7 January 2021
  • This analog gas sensor - MQ3 is suitable for detecting alcohol. It can be used in a breath analyze *[https://www.keyestudio.com/free-shipping-keyestudio-mq-3-alcohol-ethanol-sensor-detection-module-for-arduino-p0118.html '''Official Website''']
    2 KB (234 words) - 16:45, 15 July 2021
  • [[image:Ks0052 PIR motion.png|thumb|600px|right|Keyestudio PIR Motion Sensor]] The Pyroelectric infrared motion sensor can detect infrared signals from a moving person or moving animal, and outp
    4 KB (556 words) - 14:15, 7 January 2021
  • This is a knock sensor module. When you knock it, it can send a momentary signal. You can combine int Shock=3;//define knock sensor interface
    2 KB (242 words) - 14:45, 7 January 2021
  • The gas sensitive material used in MQ-6 gas sensor is SnO2, which is of lower electrical conductivity in clean air. <br> ...n the environment where sensor resides, the electrical conductivity of the sensor increases with the increase of the combustible gas concentration in the air
    3 KB (349 words) - 13:52, 7 January 2021
  • <br>[[File:Ks0462图片1.png|400px|frameless|right|Keyestudio MAX30102 Heart Rate Sensor ]]<br> The Keyestudio MAX30102 heart rate sensor integrates a pulse oximeter and a heart rate monitor, and mainly uses the M
    4 KB (655 words) - 13:50, 7 January 2021
  • ...o SHT10 digital temperature sensor is a temperature and humidity composite sensor containing digital signal outputs calibration. <br> Sensor has full scale calibration and two digital interface, which can be directly
    3 KB (393 words) - 14:36, 7 January 2021
  • ACS712-30A Current Sensor is used to measured the intensity of current. It contains ACS712ELC-30A chi ...hen upload program and connect wires. After plugging in power, LED on this sensor is on and I2C LCD1602 Module displays the current intensity shown as below.
    3 KB (350 words) - 14:22, 7 January 2021
  • ACS712-20A Current Sensor is used to measure the intensity of current. It contains ACS712ELC-20A chip ...hen upload program and connect wires. After plugging in power, LED on this sensor is on and I2C LCD1602 Module displays the current intensity shown as below.
    3 KB (347 words) - 14:23, 7 January 2021
  • [[image:ks0111图.jpg|thumb|600px|right|Keyestudio EASY plug Crash Sensor]] Crash sensor, also known as snap-action switch, is an electric switch that is actuated b
    3 KB (526 words) - 16:08, 7 January 2021
  • * Product type: Semiconductor gas sensor ...tudio.com/free-shipping-keyestudio-mq-135-sno2-benzene-sulfide-air-quality-sensor-module-for-arduino-p0116.html '''Official Website''']
    2 KB (292 words) - 14:07, 7 January 2021
  • ACS712-5A Current Sensor is used to measure the intensity of current. It contains ACS712ELC-5B chip, ...hen upload program and connect wires. After plugging in power, LED on this sensor is on and I2C LCD1602 Module displays the current intensity shown as below.
    3 KB (346 words) - 14:24, 7 January 2021
  • ==keyestudio New sensor kit with Uno== Sensor kit for Arduino<br>
    55 KB (8,127 words) - 08:48, 29 April 2021
  • [[image:KS0335.png|thumb|600px|right|Keyestudio PIR Motion Sensor 3PCS]] The Pyroelectric infrared motion sensor can detect infrared signals from a moving person or moving animal, and outp
    3 KB (460 words) - 15:18, 22 November 2021
  • 1 KB (196 words) - 16:17, 15 July 2021
  • ==TEMT6000 Ambient Light Sensor == ...our project. When that day comes, go get yourself a TEMT6000 ambient light sensor.<br>
    3 KB (384 words) - 14:19, 7 January 2021
  • ...ensor is a very affordable and detects the distance between the ultrasonic sensor and obstacle. It adopts CS100A chip, compatible with 3.3V and 5V. Its maxim ...iving the returned information, it will calculate the distance between the sensor and the obstacle by determining the time difference of the transmitted sign
    3 KB (445 words) - 11:13, 10 August 2021
  • Infrared obstacle avoidance sensor is equipped with distance adjustment function and is especially designed fo This sensor has strong adaptability to ambient light and is of high precision. It has a
    3 KB (369 words) - 14:13, 7 January 2021
  • [[image:ks0114图.jpg|thumb|600px|right|EASY plug Knock Sensor ]] The knock sensor is mainly composed of SW-280 vibration switch, which is an inductive proxim
    2 KB (340 words) - 16:14, 7 January 2021
  • ...e baud rate to 9600. you can see the distance value between the ultrasonic sensor and the obstacle, as shown below.
    3 KB (432 words) - 16:00, 12 January 2022
  • == keyestudio LM35 Linear Temperature Sensor== LM35 Linear Temperature Sensor is based on semiconductor LM35 temperature sensor. It can be used to detect ambient air temperature. <br>
    3 KB (375 words) - 14:41, 7 January 2021
  • [[image:Ks0106.png|thumb|600px|right|EASY plug Photocell Sensor]] keyestudio EASY Plug photocell sensor is a semiconductor, integrated with a photoresistor, easy to use and very c
    3 KB (471 words) - 15:54, 7 January 2021
  • ...tps://www.keyestudio.com/free-shipping-keyestudio-mq-4-natural-gas-methane-sensor-detection-module-for-arduino-p0014.html '''Official Website'''] ...xpress.com/store/product/Free-sgipping-Keyestudio-MQ-4-natural-gas-methane-sensor-detection-module-for-arduino/1452162_32626342649.html?spm=2114.12010612.814
    2 KB (236 words) - 15:02, 7 January 2021
  • [[image:ks0107图.jpg|thumb|600px|right|Keyestudio EASY plug Water Sensor]] This sensor is easy-to-use, portable and particularly designed to identify and detect w
    4 KB (574 words) - 15:57, 7 January 2021
  • The gas sensitive material used in MQ-5 gas sensor is SnO2, which is of lower electrical conductivity in clean air. <br> ...n the environment where sensor resides, the electrical conductivity of the sensor increases with the increase of the combustible gas concentration in the air
    2 KB (330 words) - 15:04, 7 January 2021
  • [[image:Ks0246图.jpg|thumb|600px|right|Keyestudio EASY plug Steam Sensor ]] ...ater detector and liquid level switch. When humidity on the surface of the sensor goes up, the output voltage will increase.<br>
    3 KB (517 words) - 08:42, 8 January 2021
  • [[image:ks0196.png|thumb|600px|right|Keyestudio GP2Y1014AU PM2.5 Dust Sensor Module]] This is sharp's GP2Y1010AU0F optical dust sensor. This dust sensor is small in size and can detect dust and smoke particles in the environment
    7 KB (1,026 words) - 16:48, 8 January 2021
  • [[image:ks0108图.jpg|thumb|600px|right|Keyestudio EASY plug Soil Moisture Sensor]] The EASY Plug soil moisture sensor can read the amount of moisture present in the soil surrounding it. It's an
    3 KB (498 words) - 15:58, 7 January 2021
  • [[image:ks0116图.jpg|thumb|600px|right|EASY plug Flame Sensor Module]] The flame sensor can be used to detect fire or other wavelength at 760nm ~1100nm light. <br>
    3 KB (479 words) - 16:17, 7 January 2021
  • This vibration sensor is based on piezoelectric ceramic chip analog vibration. It makes use of th When vibrating the piezoelectric ceramic chip, the sensor’s signal terminal will generate electrical signals. <br>
    2 KB (295 words) - 12:11, 7 January 2021
  • This sensor kit contains 48 kinds of commonly used sensor modules in playing the microcontroller, such as active buzzer module, 5V re ...ethod, test code, etc. It can help you have further understanding of those sensor modules and can apply them to interactive projects.
    7 KB (1,125 words) - 08:12, 19 November 2020
  • [[image:ks0109图.jpg|thumb|600px|right|Keyestudio EASY plug Analog Rotation Sensor]] ...tage can be subdivided into 1023, easy to be connected to Arduino with our sensor shield. <br>
    4 KB (549 words) - 16:02, 7 January 2021
  • [[image:Ks0117-.png|thumb|600px|right|EASY plug Vibration Sensor Module ]] ...'s the simplest way to check vibration with Arduino? Well, use a vibration sensor from keyestudio. <br>
    3 KB (412 words) - 16:18, 7 January 2021
  • This is a 16-key digital capacitive touch switch sensor, using the working mode of capacitive sensing trigger. Its communication is * Onboard TTP229 capacitive 16-key touch sensor IC
    2 KB (261 words) - 14:34, 7 January 2021
  • [[image:Ks0110图.jpg|thumb|800px|right|Keyestudio EASY plug Hall Magnetic Sensor]] The Hall sensor is based on Hall Effect. It can detect whether there is a magnetic object n
    4 KB (570 words) - 16:05, 7 January 2021
  • ...age:Ks0458图片1.png|thumb|400px|right|Keyestudio PAJ7620 Gesture Recognition Sensor Module(Black and Eco-friendly)]] Keyestudio PAJ7620 gesture recognition sensor module mainly integrates PAJ7620 chip. It integrates gesture recognition an
    5 KB (676 words) - 13:48, 27 April 2021
  • The gas sensitive material used in MQ-8 gas sensor is SnO2, which is of lower electrical conductivity in clean air. <br> ...n the environment where sensor resides, the electrical conductivity of the sensor increases with the increase of the hydrogen concentration in the air. <br>
    2 KB (326 words) - 14:00, 7 January 2021
  • [[image:ks0119图.jpg|thumb|600px|right|Keyestudio EASY plug Line Tracking Sensor]] The Line Tracking Sensor can tell white from in black or black from white accurately. <br>
    2 KB (334 words) - 16:20, 7 January 2021
  • [[image:0471-1.png|thumb|500px|right|keyestudio Micro bit Honeycomb Soil Sensor]]<br> ...sensor to the micro:bit control board using crocodile clip wire. With this sensor, we can make an automatic watering device. When you are not at home for a l
    1 KB (186 words) - 09:38, 27 April 2021
  • This DHT11 Temperature and Humidity Sensor is a composite sensor which contains a calibrated digital signal output of the temperature and hu This sensor includes a resistive element and a sense of wet NTC temperature measuring d
    3 KB (453 words) - 17:27, 26 May 2021
  • [[image:ks0122图.jpg|thumb|600px|right|EASY plug Flame Sensor Module]] The PIR sensor can detect infrared signals from a moving person or moving animal, outputti
    3 KB (535 words) - 16:24, 7 January 2021
  • ==keyestudio New sensor kit with MEGA 2560 R3== Sensor kit for Arduino<br>
    55 KB (8,100 words) - 08:49, 29 April 2021
  • This sensor kit which is compatible with various microcontrollers and Raspberry Pi cont At the same time, some detailed projects for each sensor based on development board are also provided, such as wiring methods and te
    996 bytes (155 words) - 11:07, 16 September 2022
  • This new type capacitive soil humidity sensor differs from other resistive sensors, adopting capacitive sensing principle ...e the circuit is not exposed at the detected end, the corrosion problem of sensor is avoided, extending life expectancy.
    2 KB (305 words) - 16:53, 12 January 2022
  • ...e:Ks0340-1.png|thumb|400px|right|Keyestudio DHT22 Temperature and Humidity Sensor]] This DHT22 digital temperature and humidity sensor is a composite Sensor which contains a calibrated digital signal output of the temperature and hu
    3 KB (455 words) - 12:29, 7 January 2021
  • [[image:ks0124图.jpg|thumb|600px|right|EASY plug DS18B20 Temperature Sensor]] The DS18B20 temperature sensor is exactly what it sounds like - a sensor used to measure ambient temperature.<br>
    3 KB (535 words) - 16:27, 7 January 2021
  • ==Keyestudio APDS-9930 Attitude Sensor Module== ...nsor which is compatible with I2C interface and the infrared LED proximity sensor. <br>
    7 KB (887 words) - 16:52, 8 January 2021
  • [[image:Ks0104-.png|thumb|600px|right|EASY plug Analog Temperature Sensor]] ...meter? Did you get one? Aha! Here it is! This EASY Plug analog temperature sensor is based on a thermistor. The resistance varies with surrounding temperatur
    4 KB (614 words) - 10:16, 7 August 2020
  • keyestudio GUVA-S12SD ultraviolet sensor is used to detect ultraviolet light. It includes GUVA-S12SD applied to meas Shine UV lamp to the sensor, and the data on serial monitor is changing showed as following picture.<br
    2 KB (325 words) - 14:27, 7 January 2021
  • [[image:KS0273-.png|thumb|600px|right|keyestudio GY-ML8511 Ultraviolet Sensor Module]] The module uses a common ML8511 UV sensor original, which can be used to detect indoor or outdoor UV density. <br>
    3 KB (432 words) - 16:53, 8 January 2021
  • [[image:ks0105图.jpg|thumb|600px|right|Keyestudio EASY plug Analog Sound Sensor]] This sound sensor is typically used in detecting the loudness in ambient environment.You can
    3 KB (481 words) - 15:52, 7 January 2021
  • 0 bytes (0 words) - 15:54, 14 July 2022
  • [[image:ks0131图.jpg|thumb|600px|right|EASY plug Analog Gas Sensor ]] This analog gas sensor - MQ2 is used in gas leakage detecting equipment in consumer electronics an
    3 KB (429 words) - 16:43, 7 January 2021
  • keyestudio XD-58C pulse sensor module is used to measure heart rates. <br> ...an display your heart rate real-time in graph. It’s in short, a heart rate sensor integrated with optical amplifier and noise elimination circuit. <br>
    3 KB (390 words) - 16:45, 8 January 2021
  • [[image:ks0113图.jpg|thumb|600px|right|EASY plug Capacitive Touch Sensor ]] ...nstead of buttons, upgrade your Arduino project with our new version touch sensor and make it cool!<br>
    3 KB (554 words) - 16:13, 7 January 2021
  • [[image:ks0132图.jpg|thumb|600px|right|Keyestudio EASY plug Analog Alcohol Sensor]] This analog gas sensor - MQ3 is suitable for detecting alcohol. It can be used in a Breath analyze
    3 KB (493 words) - 16:44, 7 January 2021
  • [[image:0394图片1.png|thumb|500px|right|EASY plug GP2Y1014AU PM2.5 Dust Sensor Module]] EASY plug GP2Y1014AU PM2.5 Dust sensor is particularly effective in detecting very fine particles, such as cigaret
    5 KB (763 words) - 08:54, 8 January 2021
  • [[image:Ks0134-.png|thumb|600px|right|EASY plug BMP180 Barometric Pressure Sensor ]] BMP180 is a pressure sensor with high precision, compact design and low power consumption. Minimum abso
    8 KB (1,065 words) - 16:50, 7 January 2021
  • The gas sensitive material used in MQ-7 gas sensor is SnO2, which is of lower electrical conductivity in clean air. <br> The electrical conductivity of the sensor increases with the increase of the carbon monoxide concentration in the air
    3 KB (372 words) - 13:57, 7 January 2021
  • ==keyestudio Sensor Kit for ARDUINO starters- K2== ...kit developed by Keyes. We provide detailed tutorials for each project or sensor module, including connection diagrams and sample codes, with which you will
    37 KB (5,301 words) - 09:17, 29 April 2021
  • ==keyestudio Sensor Kit for ARDUINO starters- K3== ...kit developed by Keyes. We provide detailed tutorials for each project or sensor module, including connection diagrams and sample codes, with which you will
    43 KB (6,160 words) - 09:21, 29 April 2021
  • [[image:ks0120图.jpg|thumb|600px|right|EASY plug Obstacle Avoidance Sensor]] Infrared obstacle avoidance sensor is equipped with distance adjustment function and is especially designed fo
    4 KB (579 words) - 16:22, 7 January 2021
  • ...|thumb|Keyestudio Formaldehyde - Toluene - Methane - Ethanol - Tobacco Gas Sensor]]<br> The keyestudio formaldehyde-toluene-methane-ethanol-tobacco gas sensor is particularly for detecting specific gas contents. It can detect the gas
    3 KB (407 words) - 13:46, 7 January 2021
  • [[image:ks0123图.jpg|thumb|600px|right|Keyestudio EASY plug LM35 Temperature Sensor ]] It is based on semiconductor LM35 temperature sensor. <br>
    4 KB (662 words) - 16:26, 7 January 2021
  • == keyestudio MLX90614 Non-contact Infrared Temperature Sensor== ...dio MLX90614 non-contact infrared temperature sensor is mainly composed of sensor MLX90614. <br>
    3 KB (363 words) - 12:14, 7 January 2021
  • ...nput circuit can be configured to bridge type (such as pressure, weighing) sensor mode. <br> *[https://www.keyestudio.com/keyestudio-hx711-load-cell-pressure-sensor-module-for-arduino-p0163.html '''Official Website''']
    1 KB (129 words) - 11:36, 27 April 2021
  • ==keyestudio Sensor Kit for ARDUINO starters- K4== ...kit developed by Keyes. We provide detailed tutorials for each project or sensor module, including connection diagrams and sample codes, with which you will
    40 KB (5,856 words) - 09:24, 29 April 2021
  • ...ge:Ks0431-1.png|thumb|400px|right|EASY plug DHT22 Temperature and Humidity Sensor]] This EASY plug DHT22 digital temperature and humidity sensor is a composite Sensor which contains a calibrated digital signal output of the temperature and hu
    4 KB (586 words) - 08:58, 8 January 2021
  • [[image:ks0244图.jpg|thumb|600px|right|EASY plug TEMT6000 Ambient Light Sensor ]] A light sensor measures the level of light in a room or ambient light in a space. <br>
    3 KB (513 words) - 08:38, 8 January 2021
  • ==keyestudio Sensor Kit for ARDUINO starters-K1== ...kit developed by Keyes. We provide detailed tutorials for each project or sensor module, including connection diagrams and sample codes, with which you will
    39 KB (5,550 words) - 09:11, 29 April 2021
  • The TCS34725 color sensor is a RGB full-color recognizer with low cost but high performance, which id As a matter of fact, the application of this sensor is broad, including RGB LED backlight control, solid state lighting, health
    3 KB (474 words) - 11:47, 17 March 2023
  • [[image:ks0115图.jpg|thumb|600px|right|Keyestudio EASY plug Tilt Sensor Module ]] Here is the principle of tilt sensor to illustrate how it works:<br>
    3 KB (508 words) - 16:15, 7 January 2021
  • [[image:Ks0133-.png|thumb|600px|right|EASY plug MQ135 Air Quality Sensor ]] MQ135 sensor uses SnO2 sensitive material because SnO2 has low electrical conductivit
    3 KB (422 words) - 16:48, 7 January 2021
  • ...457图片1.png|thumb|400px|right|Keyestudio CCS811 Carbon Dioxide/ Air Quality Sensor (Black and Eco-friendly)]] ...ainly uses the CCS811 chip. It is an ultra-low-power miniature digital gas sensor that can detect a wide range of volatile organic compounds (TVOCs), includi
    4 KB (485 words) - 13:37, 27 July 2021
  • This sensor kit contains 37 kinds of commonly used sensor modules while playing the microcontroller, such as an active buzzer module, ...ng method, test code, helping you to have a further understanding of those sensor modules and the development board.<br>
    6 KB (839 words) - 13:19, 25 June 2023
  • [[image:图片1- ks0164.png|thumb|500px|right|keyestudio Xbee Sensor Shield]] ...op this keyestudio XBEE sensor shield. It can help you easily connect most sensor modules to Arduino.
    3 KB (484 words) - 10:43, 29 April 2021

Page text matches

  • This sensor kit contains 37 kinds of commonly used sensor modules while playing the microcontroller, such as an active buzzer module, ...ng method, test code, helping you to have a further understanding of those sensor modules and the development board.<br>
    6 KB (839 words) - 13:19, 25 June 2023
  • ...ctronic device. So upgrade your Arduino project with our new version touch sensor and make it cool!!<br> This little sensor can "feel" people and metal touch and feedback a high/low voltage level. Ev
    2 KB (281 words) - 14:50, 7 January 2021
  • Tilt sensor is a digital tilt switch. It can be used as a simple tilt sensor. Simply connect the sensor to our IO/Sensor shield, so you can make amazing interactive projects.
    2 KB (286 words) - 14:46, 7 January 2021
  • This is a knock sensor module. When you knock it, it can send a momentary signal. You can combine int Shock=3;//define knock sensor interface
    2 KB (242 words) - 14:45, 7 January 2021
  • ...nwater detector and liquid level switch. When humidity on the face of this sensor rises, output voltage will increase. val=analogRead(0); //plug vapor sensor into analog port 0
    2 KB (246 words) - 14:26, 7 January 2021
  • ...nwater detector and liquid level switch. When humidity on the face of this sensor rises, output voltage will increase.<br> val=analogRead(0); //plug vapor sensor into analog port 0
    2 KB (269 words) - 10:23, 19 April 2019
  • [[image:0471-1.png|thumb|500px|right|keyestudio Micro bit Honeycomb Soil Sensor]]<br> ...sensor to the micro:bit control board using crocodile clip wire. With this sensor, we can make an automatic watering device. When you are not at home for a l
    1 KB (186 words) - 09:38, 27 April 2021
  • The Keyestudio Raspberry Pi Pico 37 in 1 sensor kit mainly contains 37 commonly used sensors/modules, the Raspberry Pi Pico Project 3: Laser Sensor <br>
    3 KB (431 words) - 15:19, 20 March 2023
  • ...ector. By emitting a beam of infrared light from one end to other end, the sensor can detect an object when it passes through the beam. It is used for many a int buttonpin = 3; // define the photo interrupter sensor interface
    2 KB (213 words) - 11:19, 8 January 2021
  • [[image:KS0309.png|thumb|600px|right|Keyestudio Thin-film Pressure Sensor]] This sensor adopts the flexible nano pressure-sensitive material with an ultra-thin
    3 KB (364 words) - 12:18, 7 January 2021
  • Infrared obstacle avoidance sensor is equipped with distance adjustment function and is especially designed fo This sensor has strong adaptability to ambient light and is of high precision. It has a
    3 KB (369 words) - 14:13, 7 January 2021
  • This vibration sensor is based on piezoelectric ceramic chip analog vibration. It makes use of th When vibrating the piezoelectric ceramic chip, the sensor’s signal terminal will generate electrical signals. <br>
    2 KB (295 words) - 12:11, 7 January 2021
  • == keyestudio LM35 Linear Temperature Sensor== LM35 Linear Temperature Sensor is based on semiconductor LM35 temperature sensor. It can be used to detect ambient air temperature. <br>
    3 KB (375 words) - 14:41, 7 January 2021
  • [[image:ks0116图.jpg|thumb|600px|right|EASY plug Flame Sensor Module]] The flame sensor can be used to detect fire or other wavelength at 760nm ~1100nm light. <br>
    3 KB (479 words) - 16:17, 7 January 2021
  • The Keyestudio ESP32 37 in 1 sensor kit mainly contains 37 commonly used sensors and modules, an ESP32 board, a Project 4: Laser Sensor<br>
    3 KB (431 words) - 15:50, 14 July 2022
  • Collision sensor, also known as electronic switch, is a digital on-off input module necessar Using 3P sensor cable to connect it to sensor shield, it can be installed to 4WD alloy mobile robot platform to realize c
    2 KB (376 words) - 14:41, 7 January 2021
  • * CCD Size 1/4 inch,Sensor pixels: 1080p * Focal Length: Adjustable;Sensor pixels: 1080p
    1 KB (189 words) - 15:41, 11 March 2022
  • ...'s the simplest way to check vibration with Arduino? Well, use a vibration sensor from keyestudio. <br> You can directly plug it on our sensor Shield V5, vibrate this sensor, and Arduino can receive a digital signal, making it easy to make computati
    2 KB (206 words) - 14:55, 7 January 2021
  • * CCD Size 1/4 inch,Sensor pixels: 1080p * Focal Length: Adjustable;Sensor pixels: 1080p
    2 KB (190 words) - 10:57, 23 April 2020
  • The Keyestudio ESP32 42 in 1 sensor kit mainly contains 42 commonly used sensors/modules, a ESP32 board, a ESP3 Project 4: Laser Sensor <br>
    4 KB (496 words) - 08:27, 28 April 2022
  • == keyestudio MLX90614 Non-contact Infrared Temperature Sensor== ...dio MLX90614 non-contact infrared temperature sensor is mainly composed of sensor MLX90614. <br>
    3 KB (363 words) - 12:14, 7 January 2021
  • 3. 5 megapixel OV5647 sensor 8. Sensor best resolution: 1080p
    741 bytes (84 words) - 12:25, 6 January 2021
  • ==TEMT6000 Ambient Light Sensor == ...our project. When that day comes, go get yourself a TEMT6000 ambient light sensor.<br>
    3 KB (384 words) - 14:19, 7 January 2021
  • This Line Tracking Sensor can detect white lines in black and black lines in white. The single line-t   Serial.println(digitalRead(3)); // print the data from the sensor
    2 KB (208 words) - 14:11, 7 January 2021
  • 3. 5 megapixel OV5647 sensor 8. Sensor best resolution: 1080p
    775 bytes (92 words) - 12:26, 27 October 2020
  • [[image:ks0371图.jpg|thumb|600px|right|EASY plug Thin-film Pressure Sensor]] This EASY plug pressure sensor adopts the flexible Nano pressure-sensitive material with an ultra-thin fil
    4 KB (527 words) - 08:46, 8 January 2021
  • ...tage can be subdivided into 1024, easy to be connected to Arduino with our sensor shield. Combined with other sensors, we can make interesting projects by r val=analogRead(0);//Read rotation sensor value from analog 0
    1 KB (212 words) - 14:37, 7 January 2021
  • [[image:Ks0110图.jpg|thumb|800px|right|Keyestudio EASY plug Hall Magnetic Sensor]] The Hall sensor is based on Hall Effect. It can detect whether there is a magnetic object n
    4 KB (570 words) - 16:05, 7 January 2021
  • The gas sensitive material used in MQ-5 gas sensor is SnO2, which is of lower electrical conductivity in clean air. <br> ...n the environment where sensor resides, the electrical conductivity of the sensor increases with the increase of the combustible gas concentration in the air
    2 KB (330 words) - 15:04, 7 January 2021
  • [[image:ks0115图.jpg|thumb|600px|right|Keyestudio EASY plug Tilt Sensor Module ]] Here is the principle of tilt sensor to illustrate how it works:<br>
    3 KB (508 words) - 16:15, 7 January 2021
  • [[image:ks0114图.jpg|thumb|600px|right|EASY plug Knock Sensor ]] The knock sensor is mainly composed of SW-280 vibration switch, which is an inductive proxim
    2 KB (340 words) - 16:14, 7 January 2021
  • [[image:ks0006.png|thumb|500px|right|Keyestudio keyestudio MEGA Sensor Shield V1]] Have you met with these troubles? when connecting a couple of sensor modules to MEGA 2560 control board, sometimes power output interfaces are n
    3 KB (437 words) - 17:10, 4 August 2021
  • [[image:ks0113图.jpg|thumb|600px|right|EASY plug Capacitive Touch Sensor ]] ...nstead of buttons, upgrade your Arduino project with our new version touch sensor and make it cool!<br>
    3 KB (554 words) - 16:13, 7 January 2021
  • [[image:ks0105图.jpg|thumb|600px|right|Keyestudio EASY plug Analog Sound Sensor]] This sound sensor is typically used in detecting the loudness in ambient environment.You can
    3 KB (481 words) - 15:52, 7 January 2021
  • This is a non-contact liquid level sensor can detect the liquid height in the closed container, overcoming the proble ...sensor. If the liquid is close to the sensor, the final capacitance of the sensor grows bigger. Then the changeable capacitance will be converted into some s
    2 KB (338 words) - 11:44, 10 November 2021
  • Keyestudio current detection sensor is mainly composed of a current sensor TA12-200, which can convert large current into a small amplitude of voltage ...n be connected to the Arduino dedicated sensor expansion board with the 3P sensor cable.<br>
    3 KB (414 words) - 12:12, 7 January 2021
  • [[image:ks0132图.jpg|thumb|600px|right|Keyestudio EASY plug Analog Alcohol Sensor]] This analog gas sensor - MQ3 is suitable for detecting alcohol. It can be used in a Breath analyze
    3 KB (493 words) - 16:44, 7 January 2021
  • [[image:ks0119图.jpg|thumb|600px|right|Keyestudio EASY plug Line Tracking Sensor]] The Line Tracking Sensor can tell white from in black or black from white accurately. <br>
    2 KB (334 words) - 16:20, 7 January 2021
  • [[image:Ks0246图.jpg|thumb|600px|right|Keyestudio EASY plug Steam Sensor ]] ...ater detector and liquid level switch. When humidity on the surface of the sensor goes up, the output voltage will increase.<br>
    3 KB (517 words) - 08:42, 8 January 2021
  • The Keyestudio ESP32 24 in 1 sensor kit mainly contains 24 commonly used sensors/modules, a ESP32 board, a ESP3 Project 6: Button Sensor<br>
    3 KB (357 words) - 16:51, 20 May 2022
  • [[image:Ks0117-.png|thumb|600px|right|EASY plug Vibration Sensor Module ]] ...'s the simplest way to check vibration with Arduino? Well, use a vibration sensor from keyestudio. <br>
    3 KB (412 words) - 16:18, 7 January 2021
  • The gas sensitive material used in MQ-6 gas sensor is SnO2, which is of lower electrical conductivity in clean air. <br> ...n the environment where sensor resides, the electrical conductivity of the sensor increases with the increase of the combustible gas concentration in the air
    3 KB (349 words) - 13:52, 7 January 2021
  • The Keyestudio Raspberry Pi Pico 24 in 1 sensor kit mainly contains 24 commonly used Project 3: Button Sensor <br>
    5 KB (638 words) - 14:02, 31 December 2021
  • This sensor kit which is compatible with various microcontrollers and Raspberry Pi cont At the same time, some detailed projects for each sensor based on development board are also provided, such as wiring methods and te
    996 bytes (155 words) - 11:07, 16 September 2022
  • == Keyestudio KEYBOT Programmable Robot 3-way Line Tracking Sensor == This Keyestudio three-way tracking sensor needs to be used together with the EASY plug Control board V2.0. The module
    4 KB (560 words) - 11:10, 28 April 2021
  • ...|thumb|Keyestudio Formaldehyde - Toluene - Methane - Ethanol - Tobacco Gas Sensor]]<br> The keyestudio formaldehyde-toluene-methane-ethanol-tobacco gas sensor is particularly for detecting specific gas contents. It can detect the gas
    3 KB (407 words) - 13:46, 7 January 2021
  • [[image:Ks0133-.png|thumb|600px|right|EASY plug MQ135 Air Quality Sensor ]] MQ135 sensor uses SnO2 sensitive material because SnO2 has low electrical conductivit
    3 KB (422 words) - 16:48, 7 January 2021
  • [[image:Ks0432-1.png|thumb|500px|right|keyestudio 3V Sensor Shield For BBC micro:bit]] ...r modules to the micro:bit main board, try use our keyestudio new designed sensor shield for micro:bit.<br>
    3 KB (442 words) - 15:18, 30 April 2021
  • The gas sensitive material used in MQ-8 gas sensor is SnO2, which is of lower electrical conductivity in clean air. <br> ...n the environment where sensor resides, the electrical conductivity of the sensor increases with the increase of the hydrogen concentration in the air. <br>
    2 KB (326 words) - 14:00, 7 January 2021
  • Reed switch can be used as sensor for count, limit and other purposes. For instance, a kind of bike-kilometer ..., door magnet, reed relay, oil level sensor and proximity sensor (magnetic sensor). It can be used under high-risk environment.
    3 KB (464 words) - 11:25, 8 January 2021
  • ....jpg|thumb|600px|right|Keyestudio EASY plug DHT11 Temperature and Humidity Sensor]] The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. <br>
    3 KB (465 words) - 16:42, 7 January 2021
  • [[image:ks0108图.jpg|thumb|600px|right|Keyestudio EASY plug Soil Moisture Sensor]] The EASY Plug soil moisture sensor can read the amount of moisture present in the soil surrounding it. It's an
    3 KB (498 words) - 15:58, 7 January 2021
  • This flame sensor can be used to detect fire or other lights with wavelength stands at 760nm ...close to the sensor, when the sensor detects the flame, another led on the sensor is turned on.<br>
    2 KB (293 words) - 14:55, 7 January 2021
  • ...uired, and I2C communication can be performed simultaneously with multiple sensor modules by changing the address. <br> ...nication ports, ensuring that the MCU can perform I2C communication with 9 sensor modules at the same time.
    2 KB (231 words) - 11:10, 29 April 2021
  • [[image:ks0109图.jpg|thumb|600px|right|Keyestudio EASY plug Analog Rotation Sensor]] ...tage can be subdivided into 1023, easy to be connected to Arduino with our sensor shield. <br>
    4 KB (549 words) - 16:02, 7 January 2021
  • ...e with micro bit and other commonly used sensor modules. In addition, this sensor kit also provides various learning projects for you, including wiring diagr | align="center" | Micro bit Sensor Shield V2
    10 KB (1,374 words) - 14:07, 10 December 2021
  • [[image:ks0111图.jpg|thumb|600px|right|Keyestudio EASY plug Crash Sensor]] Crash sensor, also known as snap-action switch, is an electric switch that is actuated b
    3 KB (526 words) - 16:08, 7 January 2021
  • [[image:ks0244图.jpg|thumb|600px|right|EASY plug TEMT6000 Ambient Light Sensor ]] A light sensor measures the level of light in a room or ambient light in a space. <br>
    3 KB (513 words) - 08:38, 8 January 2021
  • ...uired, and I2C communication can be performed simultaneously with multiple sensor modules by changing the address. <br> ...nication ports, ensuring that the MCU can perform I2C communication with 4 sensor modules at the same time. <br>
    2 KB (304 words) - 11:07, 29 April 2021
  • [[image:ks0107图.jpg|thumb|600px|right|Keyestudio EASY plug Water Sensor]] This sensor is easy-to-use, portable and particularly designed to identify and detect w
    4 KB (574 words) - 15:57, 7 January 2021
  • This is a simple soil humidity sensor aims to detect the soil humidity. <br> If the soil is in lack of water, the analog value output by the sensor will decrease; otherwise, it will increase.
    4 KB (632 words) - 14:09, 7 January 2021
  • [[image:ks0131图.jpg|thumb|600px|right|EASY plug Analog Gas Sensor ]] This analog gas sensor - MQ2 is used in gas leakage detecting equipment in consumer electronics an
    3 KB (429 words) - 16:43, 7 January 2021
  • [[image:KS0360 (1).jpg|thumb|400px|right|Keyestudio Sensor Shield V2 for BBC micro:bit]] ...to test with other sensor modules. We particularly design this keyestudio sensor expansion board V2 for micro:bit.<br>
    4 KB (586 words) - 13:56, 21 March 2022
  • This new type capacitive soil humidity sensor differs from other resistive sensors, adopting capacitive sensing principle ...e the circuit is not exposed at the detected end, the corrosion problem of sensor is avoided, extending life expectancy.
    2 KB (305 words) - 16:53, 12 January 2022
  • ..., ideal for emitting green light. It can be easily connected to Arduino IO/Sensor shield.<br> ...ut has different internal line sequence, can’t be used compatibly with our sensor/module. </span><br>
    2 KB (298 words) - 08:31, 8 January 2021
  • The keyestudio microphone sensor is typically used in detecting the loudness in ambient environment. The Ard ...analog output, that is voltage signal real-time output of microphone. The sensor comes with a potentiometer, so that you can turn it to adjust the signal ga
    2 KB (288 words) - 14:54, 7 January 2021
  • Our water sensor is easy- to-use, portable and cost-effective, designed to identify and dete This sensor measures the volume of water drop and water quantity through an array of tr
    3 KB (410 words) - 14:08, 7 January 2021
  • [[File:KS0004图片1.png|thumb|500px|right|Keyestudio Sensor Shield V5]] In the experiments, you might often use UNO R3 control board and several sensor modules. If the interfaces of power output is not enough, you may need to a
    3 KB (537 words) - 10:15, 29 April 2021
  • [[image:ks0123图.jpg|thumb|600px|right|Keyestudio EASY plug LM35 Temperature Sensor ]] It is based on semiconductor LM35 temperature sensor. <br>
    4 KB (662 words) - 16:26, 7 January 2021
  • [[image:ks0124图.jpg|thumb|600px|right|EASY plug DS18B20 Temperature Sensor]] The DS18B20 temperature sensor is exactly what it sounds like - a sensor used to measure ambient temperature.<br>
    3 KB (535 words) - 16:27, 7 January 2021
  • This analog gas sensor - MQ2 is used in gas leakage detecting equipment in consumer electronics an This sensor is suitable for detecting LPG, I-butane, propane, methane, alcohol, Hydroge
    2 KB (241 words) - 16:42, 15 July 2021
  • |12 || Button Sensor || 4 || [[File:图片1-3014-12.png|300px|frameless|]] | 13 || Ball Tilt Sensor || 2 || [[File:图片1-3014-13.png|300px|frameless|]]
    8 KB (904 words) - 10:22, 23 December 2021
  • ...r, an obstacle avoidance sensor, an line tracking sensor and an ultrasonic sensor are included.<br><br> Project 4: Line Tracking Sensor <br>
    3 KB (468 words) - 08:38, 24 August 2023
  • [[image:ks0120图.jpg|thumb|600px|right|EASY plug Obstacle Avoidance Sensor]] Infrared obstacle avoidance sensor is equipped with distance adjustment function and is especially designed fo
    4 KB (579 words) - 16:22, 7 January 2021
  • The gas sensitive material used in MQ-7 gas sensor is SnO2, which is of lower electrical conductivity in clean air. <br> The electrical conductivity of the sensor increases with the increase of the carbon monoxide concentration in the air
    3 KB (372 words) - 13:57, 7 January 2021
  • * Multi-purpose:timing watering mode and sensor detection mode * High waterproof:capacitive soil sensor is waterproof
    2 KB (235 words) - 10:17, 6 April 2021
  • ...t phone charging module, a temperature and humidity sensor, a BH1750 light sensor, a buzzer, an LCD1602 display, a push button module, an LED module and othe ...tart from those basic ones like learning how to control a signal module or sensor, or aim at a more sophisticated one, the one integrating most of these comp
    2 KB (269 words) - 13:43, 22 September 2022
  • <br>[[File:Ks0462图片1.png|400px|frameless|right|Keyestudio MAX30102 Heart Rate Sensor ]]<br> The Keyestudio MAX30102 heart rate sensor integrates a pulse oximeter and a heart rate monitor, and mainly uses the M
    4 KB (655 words) - 13:50, 7 January 2021
  • This is a Magnetic Induction Sensor. It senses the magnetic materials within a detection range up to 3cm. The This sensor uses the SFE Reed Switch - Magnetic Field Sensor.<br>
    2 KB (290 words) - 14:39, 7 January 2021
  • EASY plug CCS811 CO2 Air Quality Sensor(Black and Eco-friendly) EASY plug CCS811 CO2 air quality sensor can work with EASY plug control board V2.0, by connecting it to the I2C com
    3 KB (439 words) - 14:45, 10 December 2021
  • [[image:Ks0407-1.png|thumb|400px|right|keyestudio TCS34725 Color Sensor]] The keyestudio TCS34725 sensor mainly uses TCS34725 color sensor chip. <br>
    4 KB (655 words) - 12:25, 7 January 2021
  • [[image:Ks0106.png|thumb|600px|right|EASY plug Photocell Sensor]] keyestudio EASY Plug photocell sensor is a semiconductor, integrated with a photoresistor, easy to use and very c
    3 KB (471 words) - 15:54, 7 January 2021
  • This is a 16-key digital capacitive touch switch sensor, using the working mode of capacitive sensing trigger. Its communication is * Onboard TTP229 capacitive 16-key touch sensor IC
    2 KB (261 words) - 14:34, 7 January 2021
  • ==18B20 Temperature Sensor== DS18B20 is a digital temperature sensor. It can be used to quantify environmental temperature testing. <br>
    3 KB (365 words) - 14:43, 7 January 2021
  • ...Keyestudio SR01 Ultrasonic Sensor is a very affordable proximity/distance sensor that has been used mainly for object avoidance in various robotics projects ...en used in turret applications, water level sensing, and even as a parking sensor. <br>
    3 KB (449 words) - 14:30, 7 January 2021
  • [[image:KS0335.png|thumb|600px|right|Keyestudio PIR Motion Sensor 3PCS]] The Pyroelectric infrared motion sensor can detect infrared signals from a moving person or moving animal, and outp
    3 KB (460 words) - 15:18, 22 November 2021
  • ...ge:Ks0431-1.png|thumb|400px|right|EASY plug DHT22 Temperature and Humidity Sensor]] This EASY plug DHT22 digital temperature and humidity sensor is a composite Sensor which contains a calibrated digital signal output of the temperature and hu
    4 KB (586 words) - 08:58, 8 January 2021
  • 2.A host of sensor modules<br> Project 3: PIR Motion Sensor<br>
    3 KB (398 words) - 09:08, 9 June 2022
  • The distance sensor are really common in robotics projects, very useful for automation, interac ...ut has different internal line sequence, can’t be used compatibly with our sensor/module. </span><br>
    4 KB (549 words) - 08:35, 8 January 2021
  • [[image:ks0122图.jpg|thumb|600px|right|EASY plug Flame Sensor Module]] The PIR sensor can detect infrared signals from a moving person or moving animal, outputti
    3 KB (535 words) - 16:24, 7 January 2021
  • [[image:Ks0052 PIR motion.png|thumb|600px|right|Keyestudio PIR Motion Sensor]] The Pyroelectric infrared motion sensor can detect infrared signals from a moving person or moving animal, and outp
    4 KB (556 words) - 14:15, 7 January 2021
  • ...e:Ks0340-1.png|thumb|400px|right|Keyestudio DHT22 Temperature and Humidity Sensor]] This DHT22 digital temperature and humidity sensor is a composite Sensor which contains a calibrated digital signal output of the temperature and hu
    3 KB (455 words) - 12:29, 7 January 2021
  • ...o SHT10 digital temperature sensor is a temperature and humidity composite sensor containing digital signal outputs calibration. <br> Sensor has full scale calibration and two digital interface, which can be directly
    3 KB (393 words) - 14:36, 7 January 2021
  • In the smart car DIY process, we often use a line tracking sensor to make the smart car follow a line. <br> The keyestudio 3-channel line tracking module actually is an infrared sensor. The component used is a TCRT5000 infrared tube. <br>
    3 KB (396 words) - 09:37, 4 March 2021
  • ...457图片1.png|thumb|400px|right|Keyestudio CCS811 Carbon Dioxide/ Air Quality Sensor (Black and Eco-friendly)]] ...ainly uses the CCS811 chip. It is an ultra-low-power miniature digital gas sensor that can detect a wide range of volatile organic compounds (TVOCs), includi
    4 KB (485 words) - 13:37, 27 July 2021
  • keyestudio XD-58C pulse sensor module is used to measure heart rates. <br> ...an display your heart rate real-time in graph. It’s in short, a heart rate sensor integrated with optical amplifier and noise elimination circuit. <br>
    3 KB (390 words) - 16:45, 8 January 2021
  • This sensor needs to be used together with EASY plug control board.<br> ...ut has different internal line sequence, can’t be used compatibly with our sensor/module. </span><br>
    3 KB (501 words) - 16:12, 7 January 2021
  • Looking to do more with your BBC micro:bit? Unlock its potential with this sensor breakout board for the BBC micro:bit!<br> We specially design this sensor breakout board to make simple connection with the micro:bit main board. It
    2 KB (368 words) - 10:26, 27 April 2021
  • [[image:0414图片1.png|thumb|400px|right|Keyestudio Turbidity Sensor V1.0]] The keyestudio turbidity sensor detects water quality by measuring level of turbidity. <br>
    4 KB (594 words) - 12:27, 7 January 2021
  • ...ut has different internal line sequence, can’t be used compatibly with our sensor/module. </span><br> * Sensor type: digital
    2 KB (330 words) - 15:51, 7 January 2021

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)