Ks0136 keyestudio EASY plug OLED Module

From Keyestudio Wiki
Jump to: navigation, search
EASY plug OLED Module

Introduction

OLED is short for organic light emitting diode. On the microscopic level, an OLED display is a matrix of organic LEDs that light up when they emit energy.
Our EASY Plug OLED displays are perfect when you need a small display with vivid, high-contrast color.
The visible portion of the OLED measures 0.96" diagonal and contains 128 x 64 pixels.
An OLED display works without a backlight. Thus, it can display deep black levels and can be thinner and lighter than a liquid crystal display (LCD).
In low ambient light conditions such as a dark room an OLED screen can achieve a higher contrast ratio than an LCD.
OLED technology is used in commercial applications such as displays for mobile phones and portable digital media players, car radios and digital cameras among others.
Note: this module should be used together with EASY plug control board.


Specification

  • 0.96" diagonal OLED
  • Pixels: 128 × 64
  • Color Depth: Monochrome (White)
  • 5V power
  • Brightness (cd/m2): 100 (Typ)


Technical Details

  • Dimensions: 39mm*27mm*18mm
  • Weight: 7g


Connect It Up

Connect the EASY Plug OLED module to control board using an RJ11 cable. Then connect the control board to your PC with a USB cable.

thumb


Upload the Code

Copy and paste below code to Arduino IDE and upload.

#include <SPI.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>

#define OLED_RESET 4
Adafruit_SSD1306 display(OLED_RESET);

void setup() {

// by default, we'll generate the high voltage from the 3.3v line internally! (neat!)
display.begin(SSD1306_SWITCHCAPVCC, 0x3C); // initialize with the I2C addr 0x3D (for the 128x64)
// init done

// Show image buffer on the display hardware.
// Since the buffer is intialized with an Adafruit splashscreen
// internally, this will display the splashscreen.
display.display();
delay(2000);

// Clear the buffer.
display.clearDisplay();
}

void loop() {

display.clearDisplay();
display.setTextSize(1);
display.setTextColor(WHITE);
display.setCursor(0,0);
display.println("Hello,world!");
display.println("Hello,keyestudio!");
display.setTextSize(2);
display.println("Hello!");
display.println("keyes!");
display.println("keyestudio");
display.display();
delay(250);
}


What You Should See

Done uploading the code, you should be able to see the text display on the OLED screen.
thumb


Resources

Download the PDF:
https://drive.google.com/open?id=125AIxiiFbZyZKVGqTLOf9aX3tjWOrY0q

Download the libraries:
https://drive.google.com/open?id=1SYoX5AAvJDtHVJ42gBPRUUu2arq2M9Vo

Download the code:
https://drive.google.com/open?id=1QEe6-ecuSw6IRG1wiK5lbx7HPyvB8QDU



Buy from