Ks0151 keyestudio A4988 3D printer stepper motor driver CNC shield V2: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
 
Line 1: Line 1:
==keyestudio A4988 3D printer stepper motor driver CNC shield V2 ==
[[image:Ks0150-图片1.png|thumb|400px|right|Keyestudio CNC Shield V2]]
<br>[[File:ks0151.png|500px|frameless|thumb]]<br>
 


==Introduction==
==Introduction==
keyestudio CNC shield V2 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD  UNO R3  ]. <br>
It has total 3-way pin slots for stepper motor drive modules (Not Included) to drive 3-channel stepper motors.<br>
Each stepper motor only needs 2 IO ports, so 6 IO ports is enough to manage 3 stepper motors, very easy to use. This shield can make quick work for managing stepper motors in your project. <br>
To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode by plugging or unplugging the jumper cap.<br>
For example, connect the A4988 to the shield, unplug three jumpers, it is in full-step mode; if plug all the jumpers, it is 16-subdivision working mode.<br>
Different kinds of interfaces are brought out on this shield, so you can connect some external devices as you like.
==Check out these awesome specifications==
* [http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD    UNO R3 control board compatible  ]
* Supports the software [https://drive.google.com/open?id=1JSCtHr7FLF7UMxXeVGpwMbWn3BVZo7jh GrblController361Setup]
* Can drive the X/Y/Z-axis stepper motors
* Control the drive module via jumper cap. ('''Note:''' If connect the [http://www.keyestudio.com/keyestudio-reprap-stepper-motor-driver.html A4988], unplug three jumpers, as full-step mode; if plug the jumpers, 16-subdivision working mode.)
* Comes with three 4pin headers of 2.54mm pitch for 42 step motor connection.
* You can directly plug 3 [http://www.keyestudio.com/keyestudio-drv8825-stepper-motor-driver-for-3d-printer.html stepper motor drive modules] into this shield, default X_STP (connected to D2); X_DIR (D5); Y_STP (D3); Y_DIR(D6); Z_STP (D4); Z_DIR(D7).
* The enabled port (EN) of all drive modules has been connected to D8.
* Can supply the power for 3 stepper motor drive modules via the blue terminal blocks with DC 12V voltage.
* Other communication ports, like the serial communication, I2C communication.
<br>[[Image:Ks0151-1.png|800px|frameless]]<br>
==Dimensions==
* 50mm x 52mm x20mm
<br>[[Image:Ks0151-2.png|800px|frameless]]<br>


keyestudio 3D printer stepper motor shield V2 can be used as driver expansion board for engraving machines and 3D printers. It has in total 3 channel slots for stepper motor driver modules (not included) for driving 3 channel of stepper motors. Each channel of stepper motor only needs 2 IO ports, which means 6 IO ports is sufficient to manage 3 stepper motors. This shield can make quick work for managing stepper motors in your project. <br>


==Pinout Instructions==
<br>[[Image:KS0151 引脚.jpg|900px|frameless]]<br>


==Specification==


* Arduino CNC Shield Version 2.0
==Using Method==
* GRBL 0.8c compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
When using this shield, on the hardware, you need to use it with the control board ([http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD UNO R3]), the drive board (such as [http://www.keyestudio.com/keyestudio-reprap-stepper-motor-driver.html A4988]), the motor (42 stepper motor) and others. And you need to burn the firmware to the control board. So need to use the software [http://wiki.keyestudio.com/index.php/How_to_Download_Arduino_IDE Arduino IDE], and the special upper computer software, such as [https://drive.google.com/open?id=1JSCtHr7FLF7UMxXeVGpwMbWn3BVZo7jh GrblController361Setup software].<br>
* 3-Axis support (X, Y, Z , )
For detailed use, refer to our [http://wiki.keyestudio.com/index.php/Ks0094_Arduino_CNC_kit_/_CNC_Shield_V2.0_%2Bkeyestudio_Uno_R3%2B3pcs_A4988_Driver_/_GRBL_Compatible#Resources keyestudio CNC kit] on wiki website.
* 2 x End stops for each axis (6 in total)
* Spindle enable and direction
* Coolant enable
* Uses removable A4988 compatible stepper drivers. (A4988, DRV8825 and others)
* Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
* Compact design.
* Stepper Motors can be connected with 4 pin molex connectors or soldered in place.




==Resources ==
== Resources ==


'''PDF'''
*[https://drive.google.com/open?id=1inOrptybwerIC8DtUeJZHY45jixBfpQA  You can click here to download the PDF ]


https://drive.google.com/open?id=1vwcBQG5hxY6SpD8kfBXpjP2gUiQbVbiy


==Get One Now ==
==Get One Now ==
'''Official Website'''


http://www.keyestudio.com/keyestudio-cnc-shield-v2-engraving-machine-3-d-printer-a4988-driver-expansion-board-for-arduino.html
* '''Official Website:'''  http://www.keyestudio.com/ks0151.html
 
* [https://www.ebay.com/itm/132597032337  Buy from eBay ]
 
*[https://www.aliexpress.com/item/Free-shipping-Keyestudio-CNC-Shield-Board-V2-Engraving-Machine-Step-Motor-D-river-for-Arduino-12/32902951945.html?spm=2114.search0104.3.36.112868e2lMSkz8&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10151_10065_10344_10068_10342_10325_10546_10343_10340_10548_10341_10696_10084_10083_10618_10307_5012520_10059_5012620_100031_10103_10624_10623_10622_10621_10620,searchweb201603_1,ppcSwitch_7&algo_expid=b2ed7c9a-254c-4ee8-8ee0-b5b80ff4af87-5&algo_pvid=b2ed7c9a-254c-4ee8-8ee0-b5b80ff4af87&priceBeautifyAB=0  Buy from AliExpress ]
 
 
 


[[Category: shield]]
  [[Category: Shield]]

Latest revision as of 13:15, 14 August 2018

Keyestudio CNC Shield V2


Introduction

keyestudio CNC shield V2 is used as driving shield for engraving machines, fully compatible with UNO R3 .
It has total 3-way pin slots for stepper motor drive modules (Not Included) to drive 3-channel stepper motors.
Each stepper motor only needs 2 IO ports, so 6 IO ports is enough to manage 3 stepper motors, very easy to use. This shield can make quick work for managing stepper motors in your project.
To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode by plugging or unplugging the jumper cap.
For example, connect the A4988 to the shield, unplug three jumpers, it is in full-step mode; if plug all the jumpers, it is 16-subdivision working mode.
Different kinds of interfaces are brought out on this shield, so you can connect some external devices as you like.

Check out these awesome specifications

  • UNO R3 control board compatible
  • Supports the software GrblController361Setup
  • Can drive the X/Y/Z-axis stepper motors
  • Control the drive module via jumper cap. (Note: If connect the A4988, unplug three jumpers, as full-step mode; if plug the jumpers, 16-subdivision working mode.)
  • Comes with three 4pin headers of 2.54mm pitch for 42 step motor connection.
  • You can directly plug 3 stepper motor drive modules into this shield, default X_STP (connected to D2); X_DIR (D5); Y_STP (D3); Y_DIR(D6); Z_STP (D4); Z_DIR(D7).
  • The enabled port (EN) of all drive modules has been connected to D8.
  • Can supply the power for 3 stepper motor drive modules via the blue terminal blocks with DC 12V voltage.
  • Other communication ports, like the serial communication, I2C communication.


Ks0151-1.png

Dimensions

  • 50mm x 52mm x20mm


Ks0151-2.png


Pinout Instructions


KS0151 引脚.jpg


Using Method

When using this shield, on the hardware, you need to use it with the control board (UNO R3), the drive board (such as A4988), the motor (42 stepper motor) and others. And you need to burn the firmware to the control board. So need to use the software Arduino IDE, and the special upper computer software, such as GrblController361Setup software.
For detailed use, refer to our keyestudio CNC kit on wiki website.


Resources


Get One Now

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0151_keyestudio_A4988_3D_printer_stepper_motor_driver_CNC_shield_V2&oldid=10549"