Ks0151 keyestudio CNC Shield V2: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
No edit summary
 
(15 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[image:Ks0151.png|thumb|400px|right|Keyestudio CNC Shield V2]]
[[image:Ks0150-图片1.png|thumb|400px|right|Keyestudio CNC Shield V2]]
 


==Introduction==
==Introduction==
keyestudio CNC shield V2 is used as driving shield for engraving machines, fully compatible with UNO R3. <br>
keyestudio CNC shield V2 is used as driving shield for engraving machines, fully compatible with [http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD  UNO R3 ]. <br>
It has total 3-way pin slots for stepper motor drive modules (Not Included) to drive 3-channel stepper motors.<br>  
It has total 3-way pin slots for stepper motor drive modules (Not Included) to drive 3-channel stepper motors.<br>  
Each stepper motor only needs 2 IO ports, so 6 IO ports is enough to manage 3 stepper motors, very easy to use. This shield can make quick work for managing stepper motors in your project. <br>
Each stepper motor only needs 2 IO ports, so 6 IO ports is enough to manage 3 stepper motors, very easy to use. <br>
This shield can make quick work for managing stepper motors in your project. <br>
To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode by plugging or unplugging the jumper cap.<br>
To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode by plugging or unplugging the jumper cap.<br>
For example, connect the A4988 to the shield, unplug three jumpers, it is in full-step mode; if plug all the jumpers, it is 16-subdivision working mode.<br>
For example, connect the A4988 to the shield, unplug three jumpers, it is in full-step mode; if plug all the jumpers, it is 16-subdivision working mode.<br>
Line 10: Line 12:




 
<br>
==Check out these awesome specifications==
==Check out these awesome specifications==
* UNO R3 control board compatible
* [http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD    UNO R3 control board compatible ]
* Supports the software [https://drive.google.com/open?id=1JSCtHr7FLF7UMxXeVGpwMbWn3BVZo7jh GrblController361Setup]
* Supports the software [https://drive.google.com/open?id=1JSCtHr7FLF7UMxXeVGpwMbWn3BVZo7jh GrblController361Setup]
* Can drive the X/Y/Z-axis stepper motors
* Can drive the X/Y/Z-axis stepper motors
Line 21: Line 23:
* Can supply the power for 3 stepper motor drive modules via the blue terminal blocks with DC 12V voltage.
* Can supply the power for 3 stepper motor drive modules via the blue terminal blocks with DC 12V voltage.
* Other communication ports, like the serial communication, I2C communication.
* Other communication ports, like the serial communication, I2C communication.
<br>[[Image:KS0151-1.png|800px|frameless]]<br>
<br>[[Image:Ks0151-1.png|800px|frameless]]<br>
 


==Dimensions==
==Dimensions==
* 50mm x 52mm x20mm
* 50mm x 52mm x20mm
<br>[[Image:KS0151-2.png|800px|frameless]]<br>
<br>[[Image:Ks0151-2.png|800px|frameless]]<br>




==Pinout Instructions==
==Pinout Instructions==
<br>[[Image:KS0151 引脚.jpg|800px|frameless]]<br>
<br>[[Image:KS0151 引脚.jpg|900px|frameless]]<br>




Line 36: Line 37:
When using this shield, on the hardware, you need to use it with the control board ([http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD UNO R3]), the drive board (such as [http://www.keyestudio.com/keyestudio-reprap-stepper-motor-driver.html A4988]), the motor (42 stepper motor) and others. And you need to burn the firmware to the control board. So need to use the software [http://wiki.keyestudio.com/index.php/How_to_Download_Arduino_IDE Arduino IDE], and the special upper computer software, such as [https://drive.google.com/open?id=1JSCtHr7FLF7UMxXeVGpwMbWn3BVZo7jh GrblController361Setup software].<br>
When using this shield, on the hardware, you need to use it with the control board ([http://wiki.keyestudio.com/index.php/Ks0001_keyestudio_UNO_R3_BOARD UNO R3]), the drive board (such as [http://www.keyestudio.com/keyestudio-reprap-stepper-motor-driver.html A4988]), the motor (42 stepper motor) and others. And you need to burn the firmware to the control board. So need to use the software [http://wiki.keyestudio.com/index.php/How_to_Download_Arduino_IDE Arduino IDE], and the special upper computer software, such as [https://drive.google.com/open?id=1JSCtHr7FLF7UMxXeVGpwMbWn3BVZo7jh GrblController361Setup software].<br>
For detailed use, refer to our [http://wiki.keyestudio.com/index.php/Ks0094_Arduino_CNC_kit_/_CNC_Shield_V2.0_%2Bkeyestudio_Uno_R3%2B3pcs_A4988_Driver_/_GRBL_Compatible#Resources keyestudio CNC kit] on wiki website.
For detailed use, refer to our [http://wiki.keyestudio.com/index.php/Ks0094_Arduino_CNC_kit_/_CNC_Shield_V2.0_%2Bkeyestudio_Uno_R3%2B3pcs_A4988_Driver_/_GRBL_Compatible#Resources keyestudio CNC kit] on wiki website.
==Resources==
https://fs.keyestudio.com/KS0151
==Get One Now ==
* [https://www.keyestudio.com/free-shipping-keyestudio-cnc-shield-v2-engraving-machine-3-d-printer-a4988-driver-expansion-board-for-arduino-p0288-p0288.html    '''Official Website'''  ]
* [https://www.ebay.com/itm/132597032337  Buy from eBay ]
*[https://www.aliexpress.com/item/Free-shipping-Keyestudio-CNC-Shield-Board-V2-Engraving-Machine-Step-Motor-D-river-for-Arduino-12/32902951945.html?spm=2114.search0104.3.36.112868e2lMSkz8&ws_ab_test=searchweb0_0,searchweb201602_4_10152_10151_10065_10344_10068_10342_10325_10546_10343_10340_10548_10341_10696_10084_10083_10618_10307_5012520_10059_5012620_100031_10103_10624_10623_10622_10621_10620,searchweb201603_1,ppcSwitch_7&algo_expid=b2ed7c9a-254c-4ee8-8ee0-b5b80ff4af87-5&algo_pvid=b2ed7c9a-254c-4ee8-8ee0-b5b80ff4af87&priceBeautifyAB=0    Buy from AliExpress ]






[[Category: Shield]]
  [[Category: Shield]]

Latest revision as of 10:26, 29 April 2021

Keyestudio CNC Shield V2


Introduction

keyestudio CNC shield V2 is used as driving shield for engraving machines, fully compatible with UNO R3 .
It has total 3-way pin slots for stepper motor drive modules (Not Included) to drive 3-channel stepper motors.
Each stepper motor only needs 2 IO ports, so 6 IO ports is enough to manage 3 stepper motors, very easy to use.
This shield can make quick work for managing stepper motors in your project.
To easily debug the operating mode of stepper motor driver board, there are 3 jumper caps under each pin slots. You can set the working mode by plugging or unplugging the jumper cap.
For example, connect the A4988 to the shield, unplug three jumpers, it is in full-step mode; if plug all the jumpers, it is 16-subdivision working mode.
Different kinds of interfaces are brought out on this shield, so you can connect some external devices as you like.



Check out these awesome specifications

  • UNO R3 control board compatible
  • Supports the software GrblController361Setup
  • Can drive the X/Y/Z-axis stepper motors
  • Control the drive module via jumper cap. (Note: If connect the A4988, unplug three jumpers, as full-step mode; if plug the jumpers, 16-subdivision working mode.)
  • Comes with three 4pin headers of 2.54mm pitch for 42 step motor connection.
  • You can directly plug 3 stepper motor drive modules into this shield, default X_STP (connected to D2); X_DIR (D5); Y_STP (D3); Y_DIR(D6); Z_STP (D4); Z_DIR(D7).
  • The enabled port (EN) of all drive modules has been connected to D8.
  • Can supply the power for 3 stepper motor drive modules via the blue terminal blocks with DC 12V voltage.
  • Other communication ports, like the serial communication, I2C communication.


Ks0151-1.png

Dimensions

  • 50mm x 52mm x20mm


Ks0151-2.png


Pinout Instructions


KS0151 引脚.jpg


Using Method

When using this shield, on the hardware, you need to use it with the control board (UNO R3), the drive board (such as A4988), the motor (42 stepper motor) and others. And you need to burn the firmware to the control board. So need to use the software Arduino IDE, and the special upper computer software, such as GrblController361Setup software.
For detailed use, refer to our keyestudio CNC kit on wiki website.

Resources

https://fs.keyestudio.com/KS0151

Get One Now