CZ0565 Keyestudio Start and development of electronics Arduino UNO Rev3 compatible

From Keyestudio Wiki
Jump to navigation Jump to search


KEYESTUDIO UNO BOARD


Start and development of electronics Arduino UNO Rev3 compatible kit walks you through the basics of using the Arduino in a hands-on way. You'll learn through building several creative projects.

The kit includes a selection of the most common and useful electronic components with a book of 21 projects. Starting the basics of electronics, to more complex projects, the kit will help you control the physical world with sensors and actuators.

thumb

keyestudio Uno R3 is a microcontroller board based on the ATmega328, fully compatible with ARDUINO UNO REV3. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz quartz crystal, a USB connection, a power jack, 2 ICSP headers and a reset button.

It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. Note that the two ICSP headers are separately used to program the firmware to ATMEGA16U2-MU and ATMEGA328P-PU, but generally the two chips have been correctly programmed.

Keyestudio Uno R3 features the Atmega16U2 programmed as a USB-to-serial converter. The UNO is the best board to get started with electronics and coding.

If this is your first experience tinkering with the platform, the UNO is the most robust board you can start playing with.
thumb

KIT MATERIAL LIST


thumb
thumb
thumb
thumb

PROJECT LIST


10 Projects

Project 1: Hello World
Project 2: LED blinking
Project 3: Button-controlled LED
Project 4: Active buzzer
Project 5: Analog Value Reading (Potentiometer)
Project 6: PWM - Pulse Width Modulation
Project 7: Infrared Remote/Communication
Project 8: Module LCD Display 16x02
Project 9: SG90 Servo Motor
Project 10: 5V Stepper Motor

21 Projects

Project 1: Hello World
Project 2: LED blinking
Project 3: Traffic light
Project 4: LED chasing effect
Project 5: Button-controlled LED
Project 6: Active buzzer
Project 7: Passive buzzer
Project 8: Analog Value Reading (Potentiometer)
Project 9: PWM - Pulse Width Modulation
Project 10: Photocell Sensor (LDR Light Sensor)
Project 11: Flame sensor
Project 12: LM35 Temperature Sensor
Project 13: Tilt switch
Project 14: Infrared Remote/Communication
Project 15: 74HC595 - Shift Register
Project 16: 1-digit LED segment display
Project 17: 4-digit LED segment display
Project 18: LED matrix 8x8
Project 19: Module LCD Display 16x02
Project 20: SG90 Servo Motor
Project 21: 5V Stepper Motor

RESOURCE


SOFTWARE DOWNLOAD: https://www.arduino.cc/en/software

DETAILED TUTORIAL: https://fs.keyestudio.com/CZ0565