KS0560(KS0560F) Keyestudio 4WD Mecanum Robot for Arduino

From Keyestudio Wiki
Jump to: navigation, search

Description

When it comes to programming, many consider it difficult. However, KEYES group rolls out a 4WD Mecanum Robot kit to cope with this problem. This product not only allows your child to learn the knowledge of programming, but also electronics, mechanics, control logic and computer science.
   

This is a low-cost, easy-to-operate and open source programming kit. In fact, it is also simple to install and connect from complex electronics integrated into a backplate and a 2.54 anti-plug terminal, which solely need a few simple assembly steps to build your own Mecanum robot car.
 

Furthermore, it contains an IR remote control, seven-color LEDs, RGB2812, a line tracking sensor, a servo, motors, Mecanum wheels as well as an ultrasonic module. By the way, the detailed projects will guide you to learn the working principle of sensors and modules.
 

There are 12 programming courses in this kit, which rang from simple to complex. If this can not meet your demand, you can seek to alter code and add extra modules to enrich the functions. That sounds entertaining, right? Let’s get started!
 

Features

1.Multi-purpose function: Color light display, IR control, bluetooth control, universal wheels control, ultrasonic following, ultrasonic obstacle avoidance, 4WD drive, car tracking and UNO PLUS control board.
  2.Easy to build: Motor drive , RGB2812 and seven-color LEDs have been integrated on the bottom plate and without welding circuit. 
  3.Novel style: We use the Mecanum wheels and the wirings between modules are simple.
  4. High extension: Preserve IIC, UART, SPI, ESP8266 WIFI and you can extend other sensors and modules. What’s more, the matrix keyboard has a strong controllability.
  5. Basic programming learning:Using C language for Arduino IDE and Scratch graphical programming.
 

Parameters

Input voltage:7-12V
Working voltage:5V
Maximum power consumption:15W
Motor speed: 5V 200RPM
Motor drive mode: DRV8833 Motor drive
Ultrasonic induction angle: <15 degrees
Ultrasonic detection distance: 2cm-400cm
Infrared remote control distance: 10M (measured)
Bluetooth remote control distance: 50M(measured)
Bluetooth control: Support Android and iOS system

Kit


thumb

thumb

thumb

thumb

thumb

Projects

Project 1: Seven-Color LED
Project 2: WS2812 RGB
Project 3: Servo
Project 4: Motor
Project 5: Line Tracking Sensor
Project 6: Line Tracking Smart Car
Project 7: Ultrasonic Sensor
Project 8: Ultrasonic Following Smart Car
Project 9: Ultrasonic Obstacle Avoidance Smart Car
Project 10: IR Remote Control
Project 11: IR Remote Control Smart Car
Project 12: Bluetooth Control

Resources

Download code, libraries and more details, please refer to the following link:https://fs.keyestudio.com/KS0560