Ks0032 keyestudio RGB LED Module

From Keyestudio Wiki
Jump to navigation Jump to search


Introduction

This is a full-color LED module, which contains 3 basic colors－red, green and blue. They can be seen as separate LED lights.
After programming, you can turn them on and off by sequence or can also use PWM analog output to mix three colors to generate different colors.
thumb


Specification

  • Color: red, green and blue
  • Brightness: High
  • Voltage: 5V
  • Input: digital level


Connection Diagram


thumb


Sample Code

int redpin = 10; //select the pin for the red LED
int bluepin =9; // select the pin for the blue LED
int greenpin =11;// select the pin for the green LED
int val;
void setup() {
  pinMode(redpin, OUTPUT);
  pinMode(bluepin, OUTPUT);
  pinMode(greenpin, OUTPUT);
  }
void loop() 
{for(val=255; val>0; val--)
  {analogWrite(11, val);
   analogWrite(10, 255-val);
   analogWrite(9, 128-val);
   delay(1); 
  }
for(val=0; val<255; val++)
  {analogWrite(11, val);
   analogWrite(10, 255-val);
   analogWrite(9, 128-val);
   delay(1);  
}
}


Result

Done uploading the code, you should see the RGB LED flashing with different colors.
thumb


Resources

Video
http://video.keyestudio.com/ks0032/

PDF and Code
https://fs.keyestudio.com/KS0032



Buy from

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0032_keyestudio_RGB_LED_Module&oldid=30705"