View source for KS0481 Keyestudio Micro bit Honeycomb PS2 Joystick Module


<br>[[image:0481-1.png|thumb|450px|right|Keyestudio Micro bit Honeycomb PS2 Joystick Module]]<br>

<br>
==Description==
The keyestudio micro bit Honeycomb PS2 joystick module is fully compatible with micro bit control board. In the experiment, we  connect the joystick module to the micro:bit control board using crocodile clip wire. There are 6 ports on the module, two GND ports  are connected. When controlling it, we need to connect the VRx，VRy port to the analog port of the micro:bit control board, and the SW port to the digital port of the micro:bit control board. We can judge the working state of the joystick on the module by reading the two analog values and the high and low levels of a digital port.<br>
<span style=color:red> Special Note: When testing the SW port function, for some products, we need connect a resistor to SW interface (connect to VCC port after connecting a resistor), the port function is valid; otherwise SW port is invalid.</span>

'''Technical Parameters'''<br>
* Working voltage: DC 3.0-3.3V
* Control port: analog port (VRx VRy) and digital port (SW)
* Size: 40mm*45mm*31mm
* Weight: 11.5g
* Environmental attributes: ROHS

'''Wiring Diagram'''<br>
<br>[[File:0481-2.png|450px|frameless|thumb]]<br>

'''Test Code'''<br>
<br>[[File:0481-3.png|450px|frameless|thumb]]<br>

'''Test Result'''<br>
According to wiring diagram, upload test code successfully. After power-on, we can see the analog value of the X-Y-axis on the PS2 joystick module and the digital value of the SW port on the dot matrix of the micro:bit control board.

==Resources ==
*'''Download relevant datasheet and code:''' 

https://fs.keyestudio.com/KS0481

<br>

==Get One Now==
*[  Shop on aliexpress ]