Ks0119 keyestudio EASY plug Line Tracking Sensor: Difference between revisions

From Keyestudio Wiki
Jump to navigation Jump to search
(Created page with "==EASY plug Line Tracking Sensor== <br>500px|frameless|thumb<br> ==Introduction== This Line Tracking Sensor can detect white line in black and black lin...")
 
 
(11 intermediate revisions by the same user not shown)
Line 1: Line 1:
==EASY plug Line Tracking Sensor==
[[image:ks0119图.jpg|thumb|600px|right|Keyestudio EASY plug Line Tracking Sensor]]
<br>[[File:ks0119-1.png|500px|frameless|thumb]]<br>


==Introduction==
==Introduction==
This Line Tracking Sensor can detect white line in black and black line in white. The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line. Multi-channel option can be easily achieved by installing required number of line-tracking sensors. <br>
The Line Tracking Sensor can tell white from in black or black from white accurately. <br>
The working principle is simple, using infrared light's different reflectivity of different color, and converting the strength of the reflected signal into current signal. <br>
The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line. <br>
Note: this module needs to be used together with EASY plug control board.<br>
The working principle is simple, using infrared light's different reflectivity for different color, and converting the strength of the reflected signal into current signal. <br>
This sensor needs to be used together with EASY plug control board.<br>


<span style=color:red> '''Special Note:''' <br>
The sensor/module is equipped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has different internal line sequence, can’t be used compatibly with our sensor/module. </span><br>
<br>


==Specification==
==Specification==
* Interface: Easy plug
* Connector: Easy plug
* Power supply: +5V
* Power supply: 5V
* Operating current: <10mA
* Operating current: <10mA
* Operating temperature range: 0°C ~ + 50°C
* Operating temperature: 0℃~ 50℃
* Output Level: TTL level
* Output Level: TTL (Black for LOW output, White for HIGH output)
* Size: 56.8*16mm
* High quality connector
* Weight: 5g
 
<br>
==Technical Details==
* Dimensions: 57mm*16mm*18mm
* Weight: 4.8g
 
<br>
==Connect It Up ==
Connect the EASY Plug Line Tracking sensor and LED module to control board using RJ11 cables. Then connect the control board to your PC with a USB cable.
<br>[[File:循迹灯.png|600px|frameless|thumb]]<br>
 
<br>
==What You Should See==
<br>[[File:ks0397 3-1.png|600px|frameless|thumb]]<br>
<br>
Done uploading the code to board, open the serial monitor and set the baud rate to 9600, then you can see the data is printed on the monitor, and will control LED on.
<br>[[File:ks0397 3-2.png|600px|frameless|thumb]]<br>
<br>[[File:ks0397 3-3.png|600px|frameless|thumb]]<br>
 
 
<br>
==Resources ==
 
https://fs.keyestudio.com/KS0119


<br>


==Connection Diagram ==
==Buy from ==
<br>[[File:ks0119-2.png|500px|frameless|thumb]]<br>
*[https://www.keyestudio.com/new-keyestudio-rj11-easy-plug-line-tracking-sensor-module-for-arduino-starter-steam-p0085-p0085.html  '''Official Website''' ]


*[https://www.aliexpress.com/store/product/New-Keyestudio-EASY-plug-Line-Tracking-Sensor-Module-for-Arduino-Starter/1452162_32641898662.html?spm=2114.12010612.8148356.2.579b66e63fI6km  Shop on aliexpress ]


==Sample Code==
<pre>
#define Sensor 3
#define ledpin 13
void setup()
{
  pinMode(Sensor,INPUT);
  pinMode(ledpin,OUTPUT);
  Serial.begin(9600);
}
void loop()
{
  int val =digitalRead(Sensor);
  digitalWrite(ledpin,val);
  Serial.println(val); // print the data from the sensor 
  delay(200);
}
</pre>


[[category:Module]]
[[category:EASY Plug]]

Latest revision as of 16:20, 7 January 2021

Keyestudio EASY plug Line Tracking Sensor

Introduction

The Line Tracking Sensor can tell white from in black or black from white accurately.
The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line.
The working principle is simple, using infrared light's different reflectivity for different color, and converting the strength of the reflected signal into current signal.
This sensor needs to be used together with EASY plug control board.

Special Note:
The sensor/module is equipped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface.
If you have the control board of other brands, it is also equipped with the RJ11 6P6C interface but has different internal line sequence, can’t be used compatibly with our sensor/module.


Specification

  • Connector: Easy plug
  • Power supply: 5V
  • Operating current: <10mA
  • Operating temperature: 0℃~ 50℃
  • Output Level: TTL (Black for LOW output, White for HIGH output)
  • High quality connector


Technical Details

  • Dimensions: 57mm*16mm*18mm
  • Weight: 4.8g


Connect It Up

Connect the EASY Plug Line Tracking sensor and LED module to control board using RJ11 cables. Then connect the control board to your PC with a USB cable.
thumb


What You Should See


thumb

Done uploading the code to board, open the serial monitor and set the baud rate to 9600, then you can see the data is printed on the monitor, and will control LED on.
thumb

thumb



Resources

https://fs.keyestudio.com/KS0119


Buy from

Retrieved from "http://wiki.keyestudio.com/index.php?title=Ks0119_keyestudio_EASY_plug_Line_Tracking_Sensor&oldid=30647"