KS0481 Keyestudio Micro bit Honeycomb PS2 Joystick Module: Difference between revisions
Keyestudio (talk | contribs) |
Keyestudio (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 24: | Line 24: | ||
==Resources == | ==Resources == | ||
*'''Download relevant datasheet and code:''' | *'''Download relevant datasheet and code:''' | ||
https://fs.keyestudio.com/KS0481 | |||
<br> | <br> | ||
Latest revision as of 08:46, 27 April 2021
Description
The keyestudio micro bit Honeycomb PS2 joystick module is fully compatible with micro bit control board. In the experiment, we connect the joystick module to the micro:bit control board using crocodile clip wire. There are 6 ports on the module, two GND ports are connected. When controlling it, we need to connect the VRx，VRy port to the analog port of the micro:bit control board, and the SW port to the digital port of the micro:bit control board. We can judge the working state of the joystick on the module by reading the two analog values and the high and low levels of a digital port.
Special Note: When testing the SW port function, for some products, we need connect a resistor to SW interface (connect to VCC port after connecting a resistor), the port function is valid; otherwise SW port is invalid.
Technical Parameters
- Working voltage: DC 3.0-3.3V
- Control port: analog port (VRx VRy) and digital port (SW)
- Size: 40mm*45mm*31mm
- Weight: 11.5g
- Environmental attributes: ROHS
Wiring Diagram
Test Code
Test Result
According to wiring diagram, upload test code successfully. After power-on, we can see the analog value of the X-Y-axis on the PS2 joystick module and the digital value of the SW port on the dot matrix of the micro:bit control board.
Resources
- Download relevant datasheet and code:
https://fs.keyestudio.com/KS0481
Get One Now
- [ Shop on aliexpress ]