KS0293 Keyestudio Relay Breakout Board for micro bit

Keyestudio Relay Breakout Board for micro:bit

Introduction

micro bit is an entry level development board designed by BBC for teens programming education. It supports the PXT graphical programming interface developed by Microsoft and can be used under Windows, MacOS, IOS, Android and many other operating systems without downloading the compiler.
Keyestudio relay breakout board for micro:bit has integrated a 4-way 5V relay module, fully compatible with micro bit development board. It can work only need to insert micro bit into keyestudio relay shield, then input DC 5V voltage on the relay VIN GND port, pretty simple and convenient.
4-way relay on the board is active high. Its control terminals are respectively connected to P4, P3, P7 and P6 of the micro bit development board. You only need to control the high or low output level of P4, P3, P7 and P6, thus control the 4 relay on/off.

Parameters

• Input Voltage：DC 5V
• Working Mode：active at High level
• Contact Capacity： AC120V/3A
• DC24V/3A

Test Program

You can directly copy this code to your micro:bit. Or you can make it on the micro:bit Blocks Editor

Test Result

Insert micro bit development board into keyestudio relay breakout board.

Wire it up well and powered up, note that here we use a power transfer module in order to supply voltage input 5V. Finally the leds on 4-way relay breakout board are connected and then disconnected one by one, and the external LEDs are on and off one by one, circularly.

Note that the display accessories Not Included in the shipping list.

Resource

Datasheet Download:
https://drive.google.com/open?id=1xbUSR0MDP9BY_wo6VPgzXHeJR2Y_xOy5

Buy From

You can get one now from the links below:

Official Website:
http://www.keyestudio.com/ks0293.html

Shop on AliExpress:
for micro:bit series

Shop on Amazon:
for micro:bit series