Ks0119 keyestudio EASY plug Line Tracking Sensor: Difference between revisions
Keyestudio (talk | contribs) No edit summary |
Keyestudio (talk | contribs) |
||
| Line 5: | Line 5: | ||
The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line. <br> | The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line. <br> | ||
The working principle is simple, using infrared light's different reflectivity for different color, and converting the strength of the reflected signal into current signal. <br> | The working principle is simple, using infrared light's different reflectivity for different color, and converting the strength of the reflected signal into current signal. <br> | ||
<span style= | This sensor needs to be used together with EASY plug control board.<br> | ||
<span style=color:red> '''Special Note:''' <br> | |||
The sensor/module is equiped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface. <br> If you have the control board of other brands, it is also equiped with the RJ11 6P6C interface but have different internal line sequence, can not be used compatibly with our sensor/module. </span><br> | |||
<br> | <br> | ||
==Specification== | ==Specification== | ||
* Connector: Easy plug | * Connector: Easy plug | ||
Revision as of 08:52, 22 May 2019
Introduction
The Line Tracking Sensor can tell white from in black or black from white accurately.
The single line-tracking signal provides a stable output signal TTL for a more accurate and more stable line.
The working principle is simple, using infrared light's different reflectivity for different color, and converting the strength of the reflected signal into current signal.
This sensor needs to be used together with EASY plug control board.
Special Note:
The sensor/module is equiped with the RJ11 6P6C interface, compatible with our keyestudio EASY plug Control Board with RJ11 6P6C interface.
If you have the control board of other brands, it is also equiped with the RJ11 6P6C interface but have different internal line sequence, can not be used compatibly with our sensor/module.
Specification
- Connector: Easy plug
- Power supply: 5V
- Operating current: <10mA
- Operating temperature: 0℃~ 50℃
- Output Level: TTL (Black for LOW output, White for HIGH output)
- High quality connector
Technical Details
- Dimensions: 57mm*16mm*18mm
- Weight: 4.8g
Connect It Up
Connect the EASY Plug Line Tracking sensor and LED module to control board using RJ11 cables. Then connect the control board to your PC with a USB cable.
What You Should See
Done uploading the code to board, open the serial monitor and set the baud rate to 9600, then you can see the data is printed on the monitor, and will control LED on.
Resources
Download the Arduino Datasheet:
https://drive.google.com/open?id=1_5tDsf1KbADdRdkTcWfUrLYqgneSj97p
Download the Mixly Code and Datasheet:
https://drive.google.com/open?id=1VLaMIwUTnWwufEunBdFd8UHKed3E9Vse